Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Large Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building and construction
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to automobile

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Frequently bought with the item that you are currently reviewing.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a pair of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm size

INCLUDES:
2 front or rear toe links

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want an additional excellent item to match the above mentioned item?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx, TRAC78**.

FEATURES:
Constructed of steel, refined natural finish

INCLUDES:
2 Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx.

NEEDS:
Setting up between wheel centers and rear bulkheads

SPECS:
Length: 4.9" (125mm)
Diameter: 0.20" (5mm)

REMARKS:
Fits only the 3.3 version of the T-Maxx.

Want an additional excellent item to match the above mentioned item?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

NEEDS:
Installation on the automobile

Here is a excellent item that several others have purchased the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a excellent item that several others have purchased the exact same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

This item is often bought with the above mentioned item.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

NEEDS:
Setting up on Jato

SPECS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The below item also pairs really well with the item being reviewed.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the automobile

This item is often bought with the above mentioned item.



This is a optional Racers Edge Aluminum single arm servo horn, planned for usage with Futaba servos. This heavy duty aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, but includes a third linkage mounting point and does not utilize lock down screws.