Traxxas Ring/Pinion Diff Gear E/T Maxx

This is the Ring Gear and Components for the Traxxas T-Maxx
4WD Radio Control Beast Truck.
These ring and pinion gears are installed in the front diff housing.

FEATURES:
Replaces used differential gears
Ring gear, pinion, washer and screws are built of steel.
Differential provider is made of plastic.

INCLUDES:
One 37 tooth ring gear.
One 13 tooth pinion gear.
One differential carrier.
One 6x10x0.5mm washer.
Four maker screws.

REQUIRES:
Disassembly of differential real estates and attaching the ring gear to
    the differential provider permitting the differential gears to mesh.

Want an additional fantastic thing to compliment the above pointed out thing?

Screws 3 X 15Mm Cntrsnk Mchn 6

These are countersunk Device Screws from Traxxas.

FEATURES:
stainless steel construction
phillips drive
replacement screws utilized on the Traxxas LS-II

CONSISTS OF:
(6) Screws

SPECIFICATIONS:
Size: 3x15mm

COMMENTS:
when screwed-in the head of the screw is typically flush with
the surface area

Below is an additional thing that praises the thing being talked about.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Externally diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

This thing is frequently acquired with the above pointed out thing.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

Numerous others have acquired this thing in addition to the thing that you are presently reviewing.

Fuel Tank T Maxx

This is the upgraded stock replacement fuel tank for the Traxxas T-Maxx
The fuel tank holds the fuel and screws directly to the chas actuallysis

This tank has been upgraded and NOT has a PRIMER BUTTON

FUNCTIONS:
Clear, nylon construction
Black fuel tank cap (spring filled)

CONSISTS OF:
One fuel tank
One Pre-installed lid with spring
One Pre-installed pressure tap

NEEDS:
Assembly on to Traxxas T-Maxx

SPECIFICATIONS:
Length: 68.4mm (2.70")
Width: 62.3mm (2.46")
Capacity: 125cc
Height (consisting of chassis installs, to top of lid): 84mm (3.30")
Center to Center Range in between mounting holes: 43.3mm/38.2mm

COMMENTS:
This fuel tank is unique to the T-Maxx and is not known to fit any
    other vehicles.
If a Rebuild Kit is required for this tank, oder TRAC4959.

This is a amazing addition to the thing presently being talked about.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Ideal for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the varied throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content