Traxxas Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

INCLUDES:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Setup on the automobile

Often acquired with the thing that you are currently reviewing.

Differential Assembly, Complet

This is the Total Differential Assembly for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for usage on 1/10 scale vehicles.

FEATURES:
Steel and nylon construction

INCLUDES:
One Total Differential Assembly

Several others have acquired this thing along with the thing that you are currently reviewing.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction, black in color

INCLUDES:
One Wing
One Decal Set

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This thing praises the above gone over thing.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Setup on the automobile

Below is an additional thing that praises the thing being gone over.

Cover Plates, Differential (Fr

These are the Front and Back Differential Cover Plates
for usage on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front and One Rear Diff Cover Plate
Two O-Rings
Two Gaskets
3 2x14mm Button Head Screws

NEEDS:
Setup on the automobile

Get this thing to improve the one you are reading around.

Shim Set For Differential, Four Shims, .324 X .409 X .005

This is the Diff Shim Set for the Associated 18T.

FUNCTIONS:
Steel construction

INCLUDES:
4 shims and instruction sheet

NEEDS:
Installing on differential shaft

SPECIFICATIONS:
Diameter: inner 8mm, external 10mm

Several others have acquired this thing along with the thing that you are currently reviewing.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

NEEDS:
Setup on the automobile

This thing is often acquired with the above mentioned thing.

Bulkhead, Rear (Left & Right H

This is the Back Bulkhead for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction, black in color

INCLUDES:
Two Back Bulkhead Sections
4 3 x 10mm Button Head Screws
One 2.5 x 22mm Socket Head Cap Screw

NEEDS:
Setup on the automobile

Below is an additional thing that praises the thing being gone over.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Setup over front diff assembly

This is a wonderful addition to the thing currently being gone over.

1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon construction
Black in color

INCLUDES:
One Wheelie Bar
One 2x14mm Cap Head Screws
3 2x8mm Cap Head Screws
Instruction Sheet

NEEDS:
Setup at back of chassis