Traxxas Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

SUCHES AS:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Installation on the vehicle

Regularly acquired with the thing that you are presently checking out.

Differential Assembly, Complet

This is the Complete Differential Assembly for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for use on 1/10 scale vehicles.

FEATURES:
Steel and nylon construction

SUCHES AS:
One Complete Differential Assembly

Several others have acquired this thing together with the thing that you are presently checking out.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction, black in color

SUCHES AS:
One Wing
One Decal Set

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This thing praises the above talked about thing.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Installation on the vehicle

Right here is an additional thing that praises the thing being talked about.

Cover Plates, Differential (Fr

These are the Front and Rear Differential Cover Plates
for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front and One Rear Diff Cover Plate
Two O-Rings
Two Gaskets
Three 2x14mm Button Head Screws

NEEDS:
Installation on the vehicle

Get this thing to boost the one you are reading about.

Shim Set For Differential, Four Shims, .324 X .409 X .005

This is the Diff Shim Set for the Associated 18T.

FUNCTIONS:
Steel construction

SUCHES AS:
Four shims and direction sheet

NEEDS:
Installing on differential shaft

SPECIFICATIONS:
Diameter: inner 8mm, external 10mm

Several others have acquired this thing together with the thing that you are presently checking out.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Guiding Servo Guards
One Steering Servo Cover Plate

NEEDS:
Installation on the vehicle

This thing is regularly acquired with the above stated thing.

Bulkhead, Rear (Left & Right H

This is the Rear Bulkhead for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction, black in color

SUCHES AS:
Two Rear Bulkhead Sections
Four 3 x 10mm Button Head Screws
One 2.5 x 22mm Socket Head Cap Screw

NEEDS:
Installation on the vehicle

Right here is an additional thing that praises the thing being talked about.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Two front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Installation over front diff assembly

This is a amazing enhancement to the thing presently being talked about.

1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon construction
Black in color

SUCHES AS:
One Wheelie Bar
One 2x14mm Cap Head Screws
Three 2x8mm Cap Head Screws
Instruction Sheet

NEEDS:
Installation at back of chassis