Traxxas E-Revo VXL Brushless Orange: 1/10 Scale 4WD Brushless Electric M

VXL-6s™ Water Resistant Electronic Speed Control
6s LiPo compatible
Integrated cooling fan
Real-time telemetry by means of Traxxas Link
Machined heat sink
3-LED status indicators
Powered accessory ports
10-gauge silicone wire
Patented Traxxas High-Current Connectors

Velineon® 2200kV Brushless Motor
4-pole 2200kV brushless motor
5mm output shaft
Finned can for much better heat dissipation

Up to 70+ miles per hour with 2 Threes LiPo Batteries
Traxxas Stability Management® (TSM)
Enhances straight line acceleration and braking on low-traction surface areas
Never ever dulls throttle or slows the truck
Adjusts from off to 100% assistance from the transmitter

TQi™ 2.4GHz High Output Radio System
TQi 2-channel transmitter
Immediately stores and loads settings for up to 30 Traxxas Link-enabled designs
Programmable multi-function knob
Adjustable steering and throttle portion (double rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
High 13ms frame rate and near-zero latency for responsive control
5-channel micro receiver (#6533) with reliable security
Patented water resistant receiver box with easy-access plug

Drivetrain
Maxx-Spec™ steel CV driveshafts
8mm steel stub axles
Sturdy telescoping center driveshafts

Transmission
Mod-1 pinion and spur gears
Repaired equipment mesh system
Torque-Biasing Center Drive
Cush Drive (no slipper clutch)
5mm aluminum motor plate

Differentials
Sturdy sealed 4-gear design
Upgraded bulkheads with underside access
Maxx-Spec™ ring and pinion gears
Large 8mm output shafts
Steel drive cups

Suspension
Oil-filled GTR shocks with height-adjustable threaded aluminum bodies
Inboard rocker arm suspension design for severe articulation
Low-CG design enhances managing and protects parts
Upgraded sturdy axle providers with large bearings
Sturdy rocker arms and rod ends

Chassis
Enhanced composite tub for greater toughness
Vented internal battery compartments with quick-release doors
Low-CG design for enhanced handling
Hard skid plates for driveline protection

ProGraphix® Body
Clipless body mounting system
Hard internal frame
Adjustable rear wing
External reinforcement for rollover protection

Wheels and Tires
Aggressive Talon™ EXT all-terrain tires
New tire construction withstands ballooning
Hard 3.8” black wheels
Splined 17mm blue aluminum axle hubs

Steering
High-throw bellcrank steering design
Dual water resistant 2075 servos for 250 oz.-in. of torque

Sealed Ball Bearings

Hex hardware with Rust-Resistant Black Oxide Coating

Specs
Length: 23.05 inches (585mm)
Width: 18.32 inches (465mm)
Ground Clearance: 2.9 inches (73mm)
Weight: 11.2pound (5.08kg)
Height: 8.7 inches (221mm)
Wheelbase: 14.94 inches (380mm)
Front Shock Length: 3.42 inches (87mm)
Rear Shock Length: 3.42 inches (87mm)
Tires (pre-glued): 6.4 x 3.5 inches (162mm x 88mm)
Wheels: 3.8 inches (97mm)
Speed Control: Velineon® VXL-6s
Motor (electric): 2200kV
Transmission: Single speed
Equipment Pitch: 1.0 Metric pitch (Mod-1)
Final Drive Ratio: 20.49:1
Differential Type: Sealed, 4-gear
Center Differential Type: Sealed, 4-gear (20M weight oil)
Chassis Structure / Product: Composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Bellcrank
Radio System: TQi™ 2-channel transmitter with 6533 TSM receiver
Servo: Dual 2075
Leading Speed (optional gearing): 70+ miles per hour
Skill Level: 3
Battery Compartment: 156mm x 50mm x 29mm