Traxxas E-Revo VXL Brushless Orange: 1/10 Scale 4WD Brushless Electric M

VXL-6s™ Waterproof Electronic Speed Control
Sixes LiPo compatible
Integrated cooling fan
Real-time telemetry through Traxxas Link
Machined heat sink
3-LED status indicators
Driven device ports
10-gauge silicone wire
Patented Traxxas High-Current Connectors

Velineon® 2200kV Brushless Motor
4-pole 2200kV brushless motor
5mm output shaft
Finned can for much better heat dissipation

Up to 70+ miles per hour with 2 Threes LiPo Batteries
Traxxas Stability Management® (TSM)
Improves straight line velocity and braking on low-traction surfaces
Never ever dulls throttle or slows the truck
Adjusts from off to 100% support from the transmitter

TQi™ 2.4GHz High Output Radio System
TQi 2-channel transmitter
Immediately shops and loads settings for up to 30 Traxxas Link-enabled designs
Programmable multi-function knob
Adjustable steering and throttle portion (dual rates)
Adjustable steering and throttle level of sensitivity (exponential)
Adjustable steering and throttle end points
High 13ms frame rate and near-zero latency for responsive control
5-channel micro receiver (#6533) with secure security
Patented water resistant receiver box with easy-access plug

Drivetrain
Maxx-Spec™ steel CV driveshafts
8mm steel stub axles
Sturdy telescoping center driveshafts

Transmission
Mod-1 pinion and spur gears
Repaired equipment mesh system
Torque-Biasing Center Drive
Cush Drive (no slipper clutch)
5mm aluminum motor plate

Differentials
Sturdy sealed 4-gear design
Upgraded bulkheads with underside access
Maxx-Spec™ ring and pinion gears
Large 8mm output shafts
Steel drive cups

Suspension
Oil-filled GTR shocks with height-adjustable threaded aluminum bodies
Inboard rocker arm suspension design for extreme articulation
Low-CG design enhances managing and safeguards elements
Updated durable axle carriers with large bearings
Sturdy rocker arms and rod ends

Chassis
Reinforced composite tub for higher resilience
Vented internal battery compartments with quick-release doors
Low-CG design for improved handling
Tough skid plates for driveline protection

ProGraphix® Body
Clipless body installing system
Tough internal frame
Adjustable rear wing
External support for rollover protection

Wheels and Tires
Aggressive Talon™ EXT all-terrain tires
New tire building and construction withstands ballooning
Tough 3.8” black wheels
Splined 17mm blue aluminum axle hubs

Steering
High-throw bellcrank steering design
Dual water resistant 2075 servos for 250 oz.-in. of torque

Sealed Ball Bearings

Hex hardware with Rust-Resistant Black Oxide Coating

Specifications
Length: 23.05 inches (585mm)
Width: 18.32 inches (465mm)
Ground Clearance: 2.9 inches (73mm)
Weight: 11.2lb (5.08kg)
Height: 8.7 inches (221mm)
Wheelbase: 14.94 inches (380mm)
Front Shock Length: 3.42 inches (87mm)
Rear Shock Length: 3.42 inches (87mm)
Tires (pre-glued): 6.4 x 3.5 inches (162mm x 88mm)
Wheels: 3.8 inches (97mm)
Speed Control: Velineon® VXL-6s
Motor (electrical): 2200kV
Transmission: Single speed
Equipment Pitch: 1.0 Metric pitch (Mod-1)
Last Drive Ratio: 20.49:1
Differential Type: Sealed, 4-gear
Center Differential Type: Sealed, 4-gear (20M weight oil)
Chassis Structure / Material: Composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Bellcrank
Radio System: TQi™ 2-channel transmitter with 6533 TSM receiver
Servo: Dual 2075
Top Speed (optional tailoring): 70+ miles per hour
Ability Level: 3
Battery Compartment: 156mm x 50mm x 29mm