Traxxas E-Revo VXL 4X4 Monster Truck - Purple

VXL-6sT Waterproof Electronic Speed Control
6s LiPo compatible
Integrated cooling fan
Real-time telemetry through Traxxas Link
Machined heat sink
3-LED status indications
Powered device ports
10-gauge silicone wire
Patented Traxxas High-Current Connectors
Velineon® 2200kV Brushless Motor
4-pole 2200kV brushless motor
5mm output shaft
Finned can for much better heat dissipation
As much as 70+ miles per hour with 2 3s LiPo Batteries
Traxxas Stability Management® (TSM)
Improves straight line acceleration and braking on low-traction surfaces
Never dulls throttle or slows the truck
Changes from off to 100% assistance from the transmitter
TQiT 2.4GHz High Output Radio System
TQi 2-channel transmitter
Automatically stores and loads settings for approximately 30 Traxxas Link-enabled models
Programmable multi-function knob
Adjustable steering and throttle portion (double rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
High 13ms frame rate and near-zero latency for responsive control
5-channel micro receiver (#6533) with foolproof security
Patented water resistant receiver box with easy-access plug

Drivetrain
Maxx-SpecT steel CV driveshafts
8mm steel stub axles
Sturdy telescoping center driveshafts
Transmission
Mod-1 pinion and stimulate gears
Fixed gear mesh system
Torque-Biasing Center Drive
Cush Drive (no slipper clutch)
5mm aluminum motor plate
Differentials
Sturdy sealed 4-gear design
Revamped bulkheads with underside access
Maxx-SpecT ring and pinion gears
Big 8mm output shafts
Steel drive cups
Suspension
Oil-filled GTR shocks with height-adjustable threaded aluminum bodies
Inboard rocker arm suspension design for extreme expression
Low-CG design enhances managing and secures parts
Upgraded sturdy axle carriers with large bearings
Sturdy rocker arms and rod ends

Chassis
Enhanced composite tub for higher durability
Vented internal battery compartments with quick-release doors
Low-CG design for enhanced handling
Difficult skid plates for driveline security
ProGraphix® Body
Clipless body installing system
Difficult internal frame
Adjustable rear wing
External support for rollover security
Wheels and Tires
Aggressive TalonT EXT all-terrain tires
New tire building and construction resists ballooning
Difficult 3.8" black wheels
Splined 17mm blue aluminum axle hubs
Steering
High-throw bellcrank steering design
Double water resistant 2075 servos for 250 oz.-in. of torque
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Finish

Specifications
Length: 23.05 inches (585mm)
Width: 18.32 inches (465mm)
Ground Clearance: 2.9 inches (73mm)
Weight: 11.2pound (5.08kg)
Height: 8.7 inches (221mm)
Wheelbase: 14.94 inches (380mm)
Front Shock Length: 3.42 inches (87mm)
Rear Shock Length: 3.42 inches (87mm)
Tires (pre-glued): 6.4 x 3.5 inches (162mm x 88mm)
Wheels: 3.8 inches (97mm)
Speed Control: Velineon® VXL-6s
Motor (electrical): 2200kV
Transmission: Single speed
Equipment Pitch: 1.0 Metric pitch (Mod-1)
Final Drive Ratio: 20.49:1
Differential Type: Sealed, 4-gear
Center Differential Type: Sealed, 4-gear (20M weight oil)
Chassis Structure / Material: Composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Bellcrank
Radio System: TQiT 2-channel transmitter with 6533 TSM receiver
Servo: Double 2075
Leading Speed (optional tailoring): 70+ miles per hour
Skill Level: 3
Battery Compartment: 156mm x 50mm x 29mm