Traxxas E-Revo Brushless 4Wd Monster Truck, Rtr W/ Tqi 2.4Ghz And Tsm St

This is the 2.4GHz TQi radio managed, electrical powered, prepared to run,
1/10 scale Traxxas E-Revo Brushless Edition Racing Beast Truck.
**Batteries and Charger Required.**

Factory set up waterproof Castle Creations MXL-6s Brushless Motor System
Factory set up telemetry sensing units
Sturdy 17mm splined aluminum hex hubs

FEATURES: Chassis: Nylon composite 0.08" (2mm) thick, gray in color with
incorporated and scalable dual battery compartments accomodate sport
evacuates to 6S LiPo packs, quick release battery doors and cooling
vents
Drive: 4 wheel shaft drive with decals and window mask
Motor: Castle Creations MXL-6s 2200kV brushless, 6S capable, high-
strength neodymium magnets, 5mm shaft, aluminum motor can
Motor Mount: Sturdy finned cast alloy
Radio: Traxxas TQi DSSS 2.4GHz high output, with the Traxxas Link
Wireless Module for immediate Bluetooth connectivity to an intuitive
high definition graphical user interface including Real-Time
Telemetry, Customizable Dashboards, Steering/Throttle Expo,
Steering/Braking Dual Rate, Servo Reversing, Endpoint Change,
Profile Modification and Sharing
5 channel receiver with 3 telemetry ports, factory set up
telemetry sensing units, and failsafe is consisted of and
enables model to be tuned from an iPhone FOUR, 5, 5C FIVE or iPod
Touch 5th generation or later on, iPad 3rd generation or later on, or
iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
6.5mm gold-plated ports, high efficiency heatsink
Shocks: Oil filled with tough anodized bodies with TIN covered shafts
Transmission: One speed, low CG, large steel idler gear
Differentials: Sealed, minimal slip
Ball Bearings: Full set
Wheels: 3.8" (97mm) large, 5-spoke black chrome Gemini
Tires: 3.8" (97mm) large Talon
Suspension: Sealed pivot ball
Steering: Dual servo
Body: Painted and cut, adjustable rear wing
Caster: Adjustable, caster/toe-in describes the angle of the front
suspension when seen from the side of the automobile in relation to the
chassis
Camber: Adjustable, camber describes the angle of the tops of the
tires from vertical when when seen from front or behind car

INCLUDES: Traxxas E-Revo Racing Beast Truck with brushless motor, TQi radio
painted body, decals, instruction manual, waterproof MXL-6s
Castle Creations Brushless Power System, and telemetry sensing units for
RPM/speed, motor temperature, and battery voltage

REQUIRES: Transmitter Batteries: 4 AA
Batteries: Two 7-cell NiMH batteries with Traxxas ports
Battery Charger: Compatible with picked batteries
Track and upkeep equipment

SPECIFICATIONS: Vehicle-
Length: 22.9" (582mm)
Width: 16.5" (419mm)
Height: 8.3" (210mm)
Wheelbase: 14" (358mm)
Ground Clearance: 3.9" (99mm)
Weight: 9.5pounds (4330g) without batteries
Front Track: 16.4" (416mm)
Rear Track: 16.5" (419mm) outer edges of wheels side to side
Body-
Length: 19.8" (504mm)
Width: 7.1" (181mm) at widest point
Height: 4.8" (121mm)

REMARKS: The E-Revo is available in the following colors;
Blue, TRAD65BB Red, TRAD65RR
Black, TRAD65LL Silver, TRAD65SS

All initial bearings used in the E-Revo are rubber protected.
The following list consists of the rubber protected bearings and the
non-shielded DuraTrax brand as an affordable alternative.

For Replacement Ball Bearings usage: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Fr Hubs 1 DTXC1597 1 TRAC5120
2 6x13mm Fr Hubs 1 DTXC1573 1 TRAC5180
2 12x18mm Rear Hubs 1 DTXC1597 1 TRAC5120
2 6x13mm Rear Hubs 1 DTXC1573 1 TRAC5180
2 10x15mm Differentials 1 DTXC1595 1 TRAC5119
2 8x16mm Differentials 1 DTXC1585 1 TRAC5118
4 6x12mm Differentials 2 DTXC1569 2 TRAC5117
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116
2 6x12mm Transmission 2 DTXC1569 2 TRAC5117