Traxxas E-Revo Brushless 4Wd Monster Truck, Rtr W/ Tqi 2.4Ghz And Tsm St

This is the 2.4GHz TQi radio controlled, electric powered, prepared to run,
1/10 scale Traxxas E-Revo Brushless Edition Racing Beast Truck.
**Batteries and Charger Required.**

Factory set up waterproof Castle Creations MXL-6s Brushless Motor System
Factory set up telemetry sensors
Strong 17mm splined aluminum hex hubs

INCLUDES: Chassis: Nylon composite 0.08" (2mm) thick, gray in color with
integrated and scalable double battery compartments accomodate sport
evacuates to SIX LiPo packs, fast release battery doors and cooling
vents
Drive: Four wheel shaft drive with decals and window mask
Motor: Castle Creations MXL-6s 2200kV brushless, SIX capable, high-
strength neodymium magnets, 5mm shaft, aluminum motor can
Motor Mount: Strong finned cast alloy
Radio: Traxxas TQi DSSS 2.4GHz high output, with the Traxxas Link
Wireless Module for immediate Bluetooth connectivity to an intuitive
high definition graphical user interface including Real-Time
Telemetry, Customizable Dashboards, Steering/Throttle Exposition,
Steering/Braking Dual Rate, Servo Reversing, Endpoint Modification,
Profile Customization and Sharing
5 channel receiver with 3 telemetry ports, factory set up
telemetry sensors, and failsafe is included and
enables design to be tuned from an iPhone 4S, 5, 5C 5S or iPod
Touch 5th generation or later, iPad 3rd generation or later, or
iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
6.5mm gold-plated connectors, high effectiveness heatsink
Shocks: Oil filled with hard anodized bodies with TIN coated shafts
Transmission: One speed, low CG, extra-large steel idler gear
Differentials: Sealed, minimal slip
Ball Bearings: Complete set
Wheels: 3.8" (97mm) broad, 5-spoke black chrome Gemini
Tires: 3.8" (97mm) broad Talon
Suspension: Sealed pivot ball
Steering: Dual servo
Body: Painted and cut, adjustable rear wing
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when when viewed from front or behind vehicle

INCLUDES: Traxxas E-Revo Racing Beast Truck with brushless motor, TQi radio
painted body, decals, instruction manual, waterproof MXL-6s
Castle Creations Brushless Power System, and telemetry sensors for
RPM/speed, motor temperature level, and battery voltage

REQUIRES: Transmitter Batteries: Four AA
Batteries: 2 7-cell NiMH batteries with Traxxas connectors
Battery Charger: Compatible with chosen batteries
Track and upkeep devices

SPECS: Car-
Length: 22.9" (582mm)
Width: 16.5" (419mm)
Height: 8.3" (210mm)
Wheelbase: 14" (358mm)
Ground Clearance: 3.9" (99mm)
Weight: 9.5lbs (4330g) without batteries
Front Track: 16.4" (416mm)
Rear Track: 16.5" (419mm) outer edges of wheels side to side
Body-
Length: 19.8" (504mm)
Width: 7.1" (181mm) at largest point
Height: 4.8" (121mm)

COMMENTS: The E-Revo is readily available in the following colors;
Blue, TRAD65BB Red, TRAD65RR
Black, TRAD65LL Silver, TRAD65SS

All original bearings used in the E-Revo are rubber protected.
The following list consists of the rubber protected bearings and the
non-shielded DuraTrax brand name as a cost-effective alternative.

For Replacement Ball Bearings usage: DuraTrax Traxxas
Qty. Size Place Qty Bearing Set Qty Bearing Set
2 12x18mm Fr Hubs 1 DTXC1597 1 TRAC5120
2 6x13mm Fr Hubs 1 DTXC1573 1 TRAC5180
2 12x18mm Back Hubs 1 DTXC1597 1 TRAC5120
2 6x13mm Back Hubs 1 DTXC1573 1 TRAC5180
2 10x15mm Differentials 1 DTXC1595 1 TRAC5119
2 8x16mm Differentials 1 DTXC1585 1 TRAC5118
4 6x12mm Differentials 2 DTXC1569 2 TRAC5117
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116
2 6x12mm Transmission 2 DTXC1569 2 TRAC5117