Traxxas E-Revo Brushless 4Wd Monster Truck, Rtr W/ Tqi 2.4Ghz And Tsm St

This is the 2.4GHz TQi radio managed, electric powered, ready to run,
1/10 scale Traxxas E-Revo Brushless Edition Racing Beast Truck.
**Batteries and Battery charger Required.**

Factory set up water resistant Castle Creations MXL-6s Brushless Motor System
Factory set up telemetry sensors
Sturdy 17mm splined aluminum hex hubs

INCLUDES: Chassis: Nylon composite 0.08" (2mm) thick, gray in color with
incorporated and scalable double battery compartments accomodate sport
evacuates to 6S LiPo packs, quick release battery doors and cooling
vents
Drive: 4 wheel shaft drive with decals and window mask
Motor: Castle Creations MXL-6s 2200kV brushless, 6S capable, high-
strength neodymium magnets, 5mm shaft, aluminum motor can
Motor Mount: Sturdy finned cast alloy
Radio: Traxxas TQi DSSS 2.4GHz high output, with the Traxxas Link
Wireless Module for instant Bluetooth connection to an user-friendly
high definition visual user interface including Real-Time
Telemetry, Customizable Dashboards, Steering/Throttle Expo,
Steering/Braking Dual Rate, Servo Reversing, Endpoint Adjustment,
Profile Modification and Sharing
5 channel receiver with 3 telemetry ports, factory set up
telemetry sensors, and failsafe is suched as and
allows design to be tuned from an iPhone FOUR, 5, 5C 5S or iPod
Touch 5th generation or later, iPad 3rd generation or later, or
iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
6.5mm gold-plated ports, high efficiency heatsink
Shocks: Oil filled with difficult anodized bodies with TIN layered shafts
Transmission: One speed, low CG, large steel idler gear
Differentials: Sealed, restricted slip
Ball Bearings: Complete set
Wheels: 3.8" (97mm) wide, 5-spoke black chrome Gemini
Tires: 3.8" (97mm) wide Talon
Suspension: Sealed pivot ball
Steering: Dual servo
Body: Painted and trimmed, adjustable rear wing
Caster: Adjustable, caster/toe-in describes the angle of the front
suspension when viewed from the side of the automobile in relation to the
chassis
Camber: Adjustable, camber describes the angle of the tops of the
tires from vertical when when viewed from front or behind car

CONSISTS OF: Traxxas E-Revo Racing Beast Truck with brushless motor, TQi radio
painted body, decals, instruction manual, water resistant MXL-6s
Castle Creations Brushless Power System, and telemetry sensors for
RPM/speed, motor temperature level, and battery voltage

NEEDS: Transmitter Batteries: 4 AA
Batteries: 2 7-cell NiMH batteries with Traxxas ports
Battery Battery charger: Suitable with picked batteries
Track and upkeep equipment

SPECIFICATIONS: Vehicle-
Length: 22.9" (582mm)
Width: 16.5" (419mm)
Height: 8.3" (210mm)
Wheelbase: 14" (358mm)
Ground Clearance: 3.9" (99mm)
Weight: 9.5lbs (4330g) without batteries
Front Track: 16.4" (416mm)
Rear Track: 16.5" (419mm) external edges of wheels side to side
Body-
Length: 19.8" (504mm)
Width: 7.1" (181mm) at widest point
Height: 4.8" (121mm)

COMMENTS: The E-Revo is readily available in the following colors;
Blue, TRAD65BB Red, TRAD65RR
Black, TRAD65LL Silver, TRAD65SS

All initial bearings utilized in the E-Revo are rubber protected.
The following list suches as the rubber protected bearings and the
non-shielded DuraTrax brand name as a cost-effective alternative.

For Replacement Ball Bearings usage: DuraTrax Traxxas
Qty. Size Area Qty Bearing Set Qty Bearing Set
2 12x18mm Fr Hubs 1 DTXC1597 1 TRAC5120
2 6x13mm Fr Hubs 1 DTXC1573 1 TRAC5180
2 12x18mm Back Hubs 1 DTXC1597 1 TRAC5120
2 6x13mm Back Hubs 1 DTXC1573 1 TRAC5180
2 10x15mm Differentials 1 DTXC1595 1 TRAC5119
2 8x16mm Differentials 1 DTXC1585 1 TRAC5118
4 6x12mm Differentials 2 DTXC1569 2 TRAC5117
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116
2 6x12mm Transmission 2 DTXC1569 2 TRAC5117