Traxxas Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Parts for both nitro and electrical Revo and Maxx trucks

SUCHES AS:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

Here is a wonderful thing that lots of others have purchased the very same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building and construction

SUCHES AS:
One slipper pressure plate
One slipper center

NEEDS:
Installation onto car.

This thing is often acquired with the above discussed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the above talked about thing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur equipment

NEEDS:
Installation on the car

SPECS:
Diameter: 2.16" (55mm)
Thickness: .23" (6mm)

You will love this item if you have the item just above stated.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur equipment

NEEDS:
Installation on the car

SPECS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

This thing is often acquired with the above discussed thing.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

SUCHES AS:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Installation on to slipper shaft
Staying clutch pieces

Want one more wonderful thing to match the above discussed thing?



This is a set of Pro-Line Badlands 2.8" All Surface Tires
installed on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the rear of
    the 2WD Jato, Stampede and Rustler and the front and rear of the
    Traxxas Stampede 4x4
Wheels built of nylon with a molded-in beadlock ring for scale
    look, six spoke design
M2 medium substance Badlands 2.8" tires have motorcross design tread
    with oversize lugs for maximum performance in all surface
    conditions

SUCHES AS:
2 Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECS:
Diameter: 4.95" (126mm)
Width: 2.10" (53mm)

This thing praises the above talked about thing.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

COMMENTS:
These might likewise be referred to as coverplate screws.