Traxxas Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Parts for both nitro and electric Revo and Maxx trucks

INCLUDES:
3 Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

Below is a fantastic product that numerous others have purchased the same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum construction

INCLUDES:
One slipper pressure plate
One slipper center

NEEDS:
Installation onto automobile.

This product is regularly bought with the above discussed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above discussed product.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Size: 2.16" (55mm)
Density: .23" (6mm)

You will certainly like this product if you have the product earlier pointed out.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Size: 2.12" (54mm)
Density: .23" (6mm)

This product is regularly bought with the above discussed product.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum construction
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Installation on to slipper shaft
Remaining clutch pieces

Want one more fantastic product to match the above discussed product?



This is a set of Pro-Line Badlands 2.8" All Terrain Tires
installed on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the rear of
    the 2WD Jato, Stampede and Rustler and the front and rear of the
    Traxxas Stampede 4x4
Wheels constructed of nylon with a molded-in beadlock ring for scale
    appearance, six spoke design
M2 medium compound Badlands 2.8" tires have motorcross design tread
    with oversize lugs for maximum performance in all surface
    conditions

INCLUDES:
Two Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECIFICATIONS:
Size: 4.95" (126mm)
Width: 2.10" (53mm)

This product praises the above discussed product.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These may also be referred to as coverplate screws.