Traxxas Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Elements for both nitro and electrical Revo and Maxx trucks

CONSISTS OF:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

Right here is a great thing that lots of others have actually purchased the very same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum construction

CONSISTS OF:
One slipper pressure plate
One slipper center

REQUIRES:
Installation onto vehicle.

This thing is regularly acquired with the above stated thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above gone over thing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

CONSISTS OF:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 2.16" (55mm)
Density: .23" (6mm)

You will like this item if you have the item previously discussed.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 2.12" (54mm)
Density: .23" (6mm)

This thing is regularly acquired with the above stated thing.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum construction
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Staying clutch pieces

Want one more great thing to enhance the above stated thing?



This is a set of Pro-Line Badlands 2.8" All Surface Tires
mounted on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the back of
    the 2WD Jato, Stampede and Rustler and the front and back of the
    Traxxas Stampede 4x4
Wheels constructed of nylon with a molded-in beadlock ring for scale
    look, six spoke design
M2 medium compound Badlands 2.8" tires have motorcross style tread
    with oversize lugs for optimum performance in all surface
    conditions

CONSISTS OF:
Two Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECIFICATIONS:
Diameter: 4.95" (126mm)
Width: 2.10" (53mm)

This thing compliments the above gone over thing.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

REMARKS:
These may likewise be referred to as coverplate screws.