Traxxas Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

SUCHES AS:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

Right here is a fantastic product that lots of others have purchased the same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building

SUCHES AS:
One slipper pressure plate
One slipper hub

NEEDS:
Installation onto automobile.

This product is regularly bought with the above discussed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above gone over product.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur equipment

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

You will enjoy this item if you have the item above discussed.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur equipment

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

This product is regularly bought with the above discussed product.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

SUCHES AS:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Installation on to slipper shaft
Remaining clutch pieces

Want one more fantastic product to match the above discussed product?



This is a pair of Pro-Line Badlands 2.8" All Terrain Tires
installed on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the back of
    the 2WD Jato, Stampede and Rustler and the front and back of the
    Traxxas Stampede 4x4
Wheels built of nylon with a molded-in beadlock ring for scale
    appearance, 6 spoke design
M2 medium substance Badlands 2.8" tires have motorcross style tread
    with oversize lugs for maximum efficiency in all surface
    conditions

SUCHES AS:
Two Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECIFICATIONS:
Size: 4.95" (126mm)
Width: 2.10" (53mm)

This product praises the above gone over product.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might also be referred to as coverplate screws.