Traxxas Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Parts for both nitro and electric Revo and Maxx trucks

SUCHES AS:
Two Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

Below is a excellent item that lots of others have actually purchased the same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

SUCHES AS:
One slipper pressure plate
One slipper hub

REQUIRES:
Installation onto vehicle.

This item is often purchased with the above stated item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above reviewed item.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

You will enjoy this product if you have the product previously stated.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

This item is often purchased with the above stated item.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

SUCHES AS:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Remaining clutch pieces

Want an additional excellent item to compliment the above stated item?



This is a set of Pro-Line Badlands 2.8" All Surface Tires
mounted on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the back of
    the 2WD Jato, Stampede and Rustler and the front and back of the
    Traxxas Stampede 4x4
Wheels built of nylon with a molded-in beadlock ring for scale
    appearance, 6 spoke design
M2 medium substance Badlands 2.8" tires have motorcross style tread
    with oversize lugs for maximum efficiency in all surface
    conditions

SUCHES AS:
Two Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECIFICATIONS:
Size: 4.95" (126mm)
Width: 2.10" (53mm)

This item praises the above reviewed item.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might likewise be referred to as coverplate screws.