Traxxas Rebuild Kit, Gtx Shocks (Lower Cartridge, Assembled, Pistons, Pi

This is the Shock Rebuild Set for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Restore like-new performance to used or dripping shocks
Reconstructs 2 shocks

CONSISTS OF:
Two each;
    Cartridges with O-Rings
    Bushings
    Bushing Clips
    Pistons
    Boots
    O-Rings
    4x8mm Washers
    Locknuts

You will certainly enjoy this product if you have the product earlier pointed out.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil utilized with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECIFICATIONS:
30wt (the higher the weight number the thicker the oil)
2 oz. bottle

You will certainly enjoy this product if you have the product earlier pointed out.

Ball Bearing, Black Rubber Sealed (15X24x5mm) (2)

These are the 5106A 15 x 24 x 5mm Ball Bearings
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel building and construction with black rubber seals
Used as the outer bearing in the front steering blocks and the rear
    stub axle carriers

CONSISTS OF:
Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings

SPECIFICATIONS:
Inner Diameter: 15mm
Outer Diameter: 24mm
Thickness: 5mm

Get this product to enhance the one you read around.

Ball Bearing, Black Rubber Sealed (20X27x4mm) (2)

These are the 5182A 20 x 27 x 4mm Ball Bearings
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel building and construction with black rubber seals
Used as the inner bearing in the front steering blocks and the rear
    stub axle carriers

CONSISTS OF:
Two 20 x 27 x 4mm Black Rubber Sealed Ball Bearings

SPECIFICATIONS:
Inner Diameter: 20mm
Outer Diameter: 27mm
Thickness: 4mm

Numerous others have actually purchased this product together with the product that you are currently reading about.

Suspension Arm, Lower (Left) (1), X-Maxx

This is the Lower Left Suspension Arm
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building and construction
Fits lower left front suspension
Fastens to lower section of caster block and front lower bulkhead

CONSISTS OF:
Lower Left Suspension Arm

COMMENTS:
Not interchangeable with ideal side. For the Lower Right Suspension
    Arm, order TRAC7730.

This product is often purchased with the above mentioned product.

Caster Blocks (C-Hubs), Left & Right, X-Maxx

This is the Left and Right Caster Blocks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building and construction
Supports the driveshaft and stub axles, and is held in place by the
    upper and lower suspension arms

CONSISTS OF:
Left and Right Caster Blocks

You will certainly enjoy this product if you have the product earlier pointed out.

Steering Blocks, Left & Right, X-Maxx

This is the Left and Right Steering Blocks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building and construction
Holds stub axles in place, and connects toe connect to guiding
    assembly

CONSISTS OF:
Left and Right Steering Block

Here is a excellent product that several others have actually purchased the exact same time.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
utilized on the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel building and construction with composite plastic rod ends and pressed-in
    ball links

CONSISTS OF:
Two each; Shock Shafts with Rod Ends and Ball Hyperlinks

This product compliments the main item here.

Output Gear, Transmission, 51-Tooth (1), X-Maxx

This is the Transmission Output Gear
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building and construction

CONSISTS OF:
Transmission Output Gear for the X-Maxx