Traxxas Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Rear Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building
Rocker shafts preinstalled

INCLUDES:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

The below product also sets really well with the product being gone over.

Chassis, E-Revo & Summit/ Foam

This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR

FUNCTIONS:
Nylon building
Set up foam pads
Grey in color
Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor
    adjustment

INCLUDES:
One Chassis with foam pads
Direction sheet for usage with E-Revo Brushless and Summit

REQUIRES:
Setup of all other components

SPECS:
Length: 434mm (17")
Width: 150mm (5.9")
Height: 38mm (1.5")

Below is one more product that praises the product being gone over.

Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building
Rocker shafts preinstalled

INCLUDES:
Front bulkhead halves Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

This is a amazing addition to the product currently being gone over.

Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Installs with Body Post for the Traxxas Revo.

FEATURES:
Black plastic building
"TRX" logo design on front body mount

INCLUDES:
Front and rear body mounts Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Setup on the Traxxas Revo

Want one more excellent product to enhance the above stated product?

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic building
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES:
Front and check out skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Setup on the Traxxas Revo

Want one more excellent product to enhance the above stated product?

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

REQUIRES:
Two plans had to finish truck

This product is regularly gotten with the above stated product.

Chassis Brace, Rear For Summit E-Revo

This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.

FUNCTIONS:
Aluminum building, blue in color

INCLUDES:
Rear Chassis Brace
Two 3x35mm Socket Head Screws
One 4x14mm Button Head Screw
Direction Sheet

SPECS:
Length: 5.1" (129mm)

The below product also sets really well with the product being gone over.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal building
Black in color

INCLUDES:
Six 4 x 12mm Countersunk Flathead Hex Screws

REQUIRES:
Setup on the vehicle

Lots of others have gotten this product along with the product that you are currently reading about.

Revo Wing Black, Includes Deca

This is the Black Wing for the Traxxas Revo 3.3.
This part attaches to the back of the body.

FEATURES:
Plastic building, black in color

INCLUDES:
One rear wing with decals

REQUIRES:
Setup on the Revo 3.3

SPECS:
Length: 8" (203.2mm)
Width: 3" (76.2mm)

REMARKS:
Also offered in white (TRAC9400) and exo-carbon (TRAC9447)