Traxxas Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go between the Rocker Arms and the Lower Suspension Arms

FUNCTIONS:
Black steel construction

CONSISTS OF:
2 Pushrods w/pre-installed rod ends and balls

NEEDS:
Setting up on the car

SPECS:
Length: 5.4" (137mm) end to end including rod ends
Diameter: 0.20" (5mm)

COMMENTS:
For rod ends only utilize TRAC5347

You will love this item if you have the item just above discussed.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a pair of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm diameter

CONSISTS OF:
2 front or rear toe links

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

This product praises the above talked about product.

Sidewinder 3 Waterproof 1:10Th 12V Sport Car Esc

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control.

FEATURES:
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in heavier
    cars such as E-Revos or E-Maxx class cars)
USB programs capability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in almost every environment (not planned for
    operation while submerged in liquid)
Compatible with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter
    On/Off Change, and Directions

NEEDS:
Battery adapters

SPECS:
Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter