Traxxas Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock containing the shock oil.

FEATURES:
Nylon construction

INCLUDES:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECS:
Diameter Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below thing additionally sets actually well with the thing being gone over.

Ultra Shock Body Long Grey (2)

These are the Long Shock Bodies for the Traxxas Ultra Shocks.

FEATURES:
Molded Composite
Gray in Color

INCLUDES:
Two ultra shock bodies (long)

REQUIRES:
Installation

SPECS:
Length: 1.45" (37mm)
Diameter: .51" (13mm)

This is a wonderful enhancement to the thing presently being gone over.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This thing praises the main item here.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One left and right steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

Get this thing to boost the one you are reading about.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle providers and shocks
Black in color, constructed of solidified plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Securing to chassis

REMARKS:
For the 3.3 variation just. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

This thing praises the above gone over thing.

Body Ultra Shock Xxl Grey (2)

These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
used on the Traxxas T-Maxx 3.3.

FUNCTIONS:
Molded Composite
Gray in Color

INCLUDES:
(2) Bodies

REQUIRES:
Installation

SPECS:
Length: 1.777" (45.1mm)
Diameter: 0.521" (13.2mm)

This thing is regularly bought with the above pointed out thing.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
place over the shock body and the piston heads that control the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on the majority of Traxxas nitro and electrical powered vehicles.
Two hole piston head for higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

You will certainly love this product if you have the product previously pointed out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Here is a fantastic thing that lots of others have actually purchased the very same time.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal construction, black and silver in color

INCLUDES:
Two rear stub axles and pins

SPECS:
Length: 1.65" (42mm)
Diameter: .51" (13mm) at largest point