Traxxas Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

NEEDS:
Other shock parts

SPECIFICATIONS:
Size Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below product likewise sets really well with the product being reviewed.

Ultra Shock Body Long Grey (2)

These are the Long Shock Bodies for the Traxxas Ultra Shocks.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
Two ultra shock bodies (long)

NEEDS:
Setup

SPECIFICATIONS:
Length: 1.45" (37mm)
Size: .51" (13mm)

This is a fantastic addition to the product presently being reviewed.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct kit for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This product praises the main item below.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and ideal steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Get this product to improve the one you read around.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle providers and shocks
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Securing to chassis

COMMENTS:
For the 3.3 variation just. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

This product praises the above reviewed product.

Body Ultra Shock Xxl Grey (2)

These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
utilized on the Traxxas T-Maxx 3.3.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
(2) Bodies

NEEDS:
Setup

SPECIFICATIONS:
Length: 1.777" (45.1mm)
Size: 0.521" (13.2mm)

This product is frequently gotten with the above mentioned product.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on a lot of Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to install parts.

You will certainly like this thing if you have the thing earlier pointed out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

Below is a excellent product that lots of others have actually purchased the exact same time.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal building, black and silver in color

CONSISTS OF:
Two rear stub axles and pins

SPECIFICATIONS:
Length: 1.65" (42mm)
Size: .51" (13mm) at largest point