Traxxas Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECS:
Diameter Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below item likewise sets really well with the item being discussed.

Ultra Shock Body Long Grey (2)

These are the Long Shock Bodies for the Traxxas Ultra Shocks.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
2 ultra shock bodies (long)

REQUIRES:
Installation

SPECS:
Length: 1.45" (37mm)
Diameter: .51" (13mm)

This is a superb enhancement to the item currently being discussed.

Shock Rebuild Big Bore/Ultra

This is a shock restore set for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This item compliments the main item right here.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and right steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

Get this item to improve the one you read around.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle providers and shocks
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Securing to chassis

COMMENTS:
For the 3.3 variation only. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

This item compliments the above discussed item.

Body Ultra Shock Xxl Grey (2)

These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
utilized on the Traxxas T-Maxx 3.3.

FUNCTIONS:
Molded Composite
Gray in Color

CONSISTS OF:
(2) Bodies

REQUIRES:
Installation

SPECS:
Length: 1.777" (45.1mm)
Diameter: 0.521" (13.2mm)

This item is often acquired with the above pointed out item.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on a lot of Traxxas nitro and electric powered vehicles.
Two hole piston head for higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    2 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

You will love this thing if you have the thing earlier discussed.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Right here is a great item that numerous others have bought at the same time.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal building, black and silver in color

CONSISTS OF:
2 rear stub axles and pins

SPECS:
Length: 1.65" (42mm)
Diameter: .51" (13mm) at biggest point