Traxxas Planetary Gear Diff W/Steel Ring Gear Slash/Bandit /Stampe

This is the Total Planetary Gear Differential With Steel Ring Gear
for the Traxxas Outlaw, Stampede and Rustler.

FEATURES:
Metal gear shafts
Metal and plastic primary differential

SUCHES AS:
Main differential with steel ring gear
Planetary gears and shafts
Sun gears and shafts
Silicone grease

REQUIRES:
Installation on the vehicle

COMMENTS:
For primary differential w/ steel ring - TRAC6380
Planet gear shafts - TRAC6382
Silicon grease _- TRAC6037

Numerous others have gotten this product in addition to the product that you are currently reviewing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product is frequently gotten with the above discussed product.

30T Idler Gear Steel

This is the optional Steel Idler Gear for lots of Traxxas Vehicles.

FEATURES:
Steel construction

SUCHES AS:
One steel 30T idler gear

REQUIRES:
Installation on vehicle

Want another excellent product to compliment the above discussed product?

Steel Top Drive Gear 22T

This is the 22 tooth, solidified steel leading drive gear that fits a number of Traxxas
cars. .
Suches as: 1 gear just

This is a wonderful enhancement to the product currently being discussed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

The listed below product likewise sets actually well with the product being discussed.

Gearbox Halves L&R Grey

This is a Left and Right Gearbox half with Idler Shaft for the
Traxxas Stampede and Traxxas Rustler.

FEATURES:
Gray plastic construction
Steel idler shaft

SUCHES AS:
One gearbox
One idler shaft

COMMENTS:
This part fit the standard and XL version of both the Stampede
and Rustler.

The listed below product likewise sets actually well with the product being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Density: 0.5mm

Numerous others have gotten this product in addition to the product that you are currently reviewing.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel construction
_
Roll pin pre-installed

SUCHES AS:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

Numerous others have gotten this product in addition to the product that you are currently reviewing.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Outlaw, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Lightweight carbon fiber composite transmission case
Longer motor installing slots for more gear ratio combinations
CNC 6061 aluminum motor plate, heat sink and arm mount
Bigger open area for a larger motor heat sink
Thirty day limited warranty starting at date of purchase-valid
    in the United States just

SUCHES AS:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Numerous others have gotten this product in addition to the product that you are currently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated guarantee correct installation

SUCHES AS:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and steering knuckles