Traxxas Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made from metal(most likely with a low
amount of steel).

CONSISTS OF:
4- planetary gears
4- planteary gear shafts
2- sun gears
1- sun gear positioning shaft

WAJ
1/16/94

Get this item to boost the one you read about.

Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Outlaw, Rustler, 2WD Stampede, 2WD Slash
and Beast Jam Cars

FUNCTIONS:
CNC aluminum building diff case, black in color
Solidified steel gear
Sealed differentials enables tuning to track conditions by altering
    weight of diff oil
4 O-rings assist seal against fluid leak
Thirty day limited guarantee beginning at date of purchase- valid
    in the United States only

CONSISTS OF:
Sealed Differential Case
4 O-Rings
2 Screws

SPECS:
Outside Size: 1.48" (37.5mm)
Shaft Size: .200" (5.10mm)
Total Thickness: 0834" (21.2mm)

Many others have gotten this item along with the item that you are currently reviewing.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

REMARKS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

Here is another item that praises the item being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will like this product if you have the product above pointed out.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This item is often gotten with the above pointed out item.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Outlaw, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Light weight carbon fiber composite transmission case
Longer motor installing slots for more gear ratio mixes
CNC 6061 aluminum motor plate, heat sink and arm install
Larger open location for a bigger motor heat sink
Thirty day limited guarantee beginning at date of purchase-valid
    in the United States only

CONSISTS OF:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Regularly gotten with the item that you are currently reviewing.

Main Diff W/ Steel Ring Gear/ Side Cover Plate/ Sc Rews (Ban

This is the Main Diff with Steel Ring Gear from Traxxas
for the Outlaw, Stampede and Rustler VXL series.

Includes: Main diff with steel ring gear
Side cover plate
Screws
Directions

Requires: Installation on the car

Many others have gotten this item along with the item that you are currently reviewing.

Steel Top Drive Gear 22T

This is the 22 tooth, hardened steel leading drive gear that fits numerous Traxxas
automobiles. .
Includes: 1 gear only