Traxxas Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made from metal(most likely with a low
quantity of steel).

CONSISTS OF:
4- planetary gears
4- planteary gear shafts
2- sun gears
1- sun gear alignment shaft

WAJ
1/16/94

Get this item to improve the one you read around.

Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Bandit, Rustler, 2WD Stampede, 2WD Slash
and Monster Jam Cars

FUNCTIONS:
CNC aluminum construction diff case, black in color
Hardened steel gear
Sealed differentials allows tuning to track conditions by changing
    weight of diff oil
Four O-rings help seal against fluid leakage
Thirty day limited warranty starting at date of purchase- legitimate
    in the United States just

CONSISTS OF:
Sealed Differential Case
Four O-Rings
Two Screws

SPECIFICATIONS:
Outdoors Size: 1.48" (37.5mm)
Shaft Size: .200" (5.10mm)
Total Thickness: 0834" (21.2mm)

Several others have actually purchased this item along with the item that you are currently reviewing.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel construction
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL variation of the Rustler
or Stampede.

Below is an additional item that compliments the item being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

You will like this product if you have the product just above pointed out.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

This item is frequently purchased with the above mentioned item.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Bandit, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Lightweight carbon fiber composite transmission case
Longer motor mounting slots for more gear ratio mixes
CNC 6061 aluminum motor plate, heat sink and arm mount
Bigger open location for a larger motor heat sink
Thirty day limited warranty starting at date of purchase-valid
    in the United States just

CONSISTS OF:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Regularly purchased with the item that you are currently reviewing.

Main Diff W/ Steel Ring Gear/ Side Cover Plate/ Sc Rews (Ban

This is the Main Diff with Steel Ring Gear from Traxxas
for the Bandit, Stampede and Rustler VXL series.

Includes: Main diff with steel ring gear
Side cover plate
Screws
Guidelines

Needs: Installation on the car

Several others have actually purchased this item along with the item that you are currently reviewing.

Steel Top Drive Gear 22T

This is the 22 tooth, solidified steel top drive gear that fits several Traxxas
cars. .
Includes: 1 gear just