Traxxas Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
Two of these pivot balls fit into the axle carriers at each wheel
    The pivot ball cap bushings fit in between the pivot balls
and the aluminum caps.

FEATURES:
Changes stock pivot balls and pivot ball cap bushings.
Pivot balls are made from steel, pivot ball cap bushings are made from
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

REQUIRES:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Placing pivot ball cap bushings in between the pivot
    balls and aluminum caps.

This product praises the main item below.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
Two bundles needed to finish truck

Below is one more product that praises the product being discussed.

O-Ring & Tubing Set: BCP, BCPP, B400


Summary


Inner diameter: 3mm
External diameter: 6mm
Do not use a petroleum-based lube such as Vaseline. Rather use a silicone-based lube.












The listed below product also pairs truly well with the product being discussed.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Construction
Black in Color
Enables Oversized Bearing use

INCLUDES:
One Left Axle Provider
One Right Axle Provider
4 Dust Boot Retainers
Two Bearing Spacers

REQUIRES:
Installation

Below is one more product that praises the product being discussed.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

Many others have actually gotten this product in addition to the product that you are currently reviewing.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FEATURES:
Fastens to bulkhead and assists to support axle carriers
Black in color, constructed of hardened plastic

INCLUDES:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation only.

This product praises the main item below.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Assists to support axle carriers and shocks
Black in color, constructed of hardened plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation only. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.