Traxxas Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

NEEDS:
2 plans needed to finish truck

This thing compliments the above talked about thing.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
use on the Traxxas Revo series.

FEATURES:
Nylon Building
Black in Color
Enables Oversized Bearing use

INCLUDES:
One Left Axle Carrier
One Right Axle Carrier
4 Dust Boot Retainers
2 Bearing Spacers

NEEDS:
Installation

Want another great thing to compliment the above discussed thing?

Driveshaft Boots (2) Revo

These are the replacement Drive Shaft Boots for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Rubber Building
Blue in Color

INCLUDES:
2 Blue Rubber Driveshaft Boots

NEEDS:
Assembly onto Vehicle

This thing compliments the main item here.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

INCLUDES:
2 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

NEEDS:
Assembly onto Vehicle

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within the Wheel Hubs, the Truck Needs
4 Overall of these Bearings.

Want another great thing to compliment the above discussed thing?

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FEATURES:
Stainless Steel bearing building
Blue rubber dirt shields

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECS:
Inside size: 6mm (0.24")
Outside size: 13mm (0.51")
Width: 5mm (0.20")

Regularly gotten with the thing that you are currently checking out.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Fully put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Connects to the differential with one screw pin
Works on the front or back, right or left of vehicle

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

NEEDS:
Setting up on chassis

This is a fantastic addition to the thing currently being talked about.

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls fit into the axle carriers at each wheel
    The pivot ball cap bushings fit between the pivot balls
and the aluminum caps.

FEATURES:
Replaces stock pivot balls and pivot ball cap bushings.
Pivot balls are made from steel, pivot ball cap bushings are made from
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Placing pivot ball cap bushings between the pivot
    balls and aluminum caps.