Traxxas 31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outside Size: .69" (17.5mm)

Here is a great item that several others have bought at the exact same time.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Developed for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 76

REMARKS:
For this slipper clutch design there is likewise a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This item is regularly gotten with the above stated item.

26T Pinion 48P

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

INCLUDES:
One 26 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outside Size: .58" (14mm)

Here is another item that praises the item being gone over.

Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Features: Brass pinion gear

Includes: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" Total length- 7/16"
    Shaft diameter- 1/4" Gear diameter- 1/2"
    Installing shaft (motor shaft) 1/8"

This item praises the above gone over item.

Spur Gear 45T Vxl

This is the 45T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 45T Stimulate Gear

NEEDS:
Setup on the car

SPECS:
Outer Size: 24.75mm (0.97")
Inner Size: 5.5mm (0.22")
Width: 7mm (0.28")

You will certainly enjoy this thing if you have the thing above pointed out.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Setup on the car

This item praises the main item right here.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FUNCTIONS:
Perfect replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

INCLUDES:
One Pinion Gear
One Set Screw

SPECS:
Pearly whites: 28
Pitch: 48

You will certainly enjoy this thing if you have the thing above pointed out.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale car applications
Prewired with Traxxas high existing connector

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 11.1V
Ranked Capacity: 1300mAh
Discharge Rating: 25C constant
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER take apart or modify pack circuitry in any method or puncture cells
NEVER put on flammable materials or leave unattended during
    charging
ALWAYS Charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm