Traxxas Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Functions: Brass pinion equipment

Suches as: 1 equipment and 1 set screw

Specifications: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Equipment length- 1/4" Overall length- 7/16"
    Shaft size- 1/4" Equipment size- 1/2"
    Mounting shaft (motor shaft) 1/8"

This product compliments the above gone over product.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Numerous others have actually purchased this product in addition to the product that you are presently reading about.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Equipment for the Traxxas 4-Tec.

FUNCTIONS:
Ideal replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

INCLUDES:
One Pinion Equipment
One Set Screw

SPECIFICATIONS:
Pearly whites: 28
Pitch: 48

Want an additional great product to compliment the above stated product?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for models with a slipper clutch
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

This product compliments the above gone over product.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Equipment with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Equipment
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Installation

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outdoors Diameter: .69" (17.5mm)

This product compliments the above gone over product.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Protected positive locking spring packed terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
Two black male plastic connectors
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Here is an additional product that compliments the product being gone over.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Equipment for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Developed for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 76

REMARKS:
For this slipper clutch design there is also a 86T equipment (TRAC4686),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).