Traxxas Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Features: Brass pinion gear

Consists of: 1 gear and 1 set screw

Specifications: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" Total length- 7/16"
    Shaft diameter- 1/4" Gear diameter- 1/2"
    Installing shaft (motor shaft) 1/8"

This thing praises the above gone over thing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Numerous others have gotten this thing along with the thing that you are presently reviewing.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FUNCTIONS:
Suitable replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

INCLUDES:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Pearly whites: 28
Pitch: 48

Want one more terrific thing to compliment the above mentioned thing?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Created for models with a slipper clutch
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

This thing praises the above gone over thing.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outside Diameter: .69" (17.5mm)

This thing praises the above gone over thing.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to connect in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Safe positive locking spring loaded terminals for consistent
    contact
Several locking barbs keep terminals protect

INCLUDES:
Two black male plastic adapters
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins

Here is one more thing that praises the thing being gone over.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Created for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 76

REMARKS:
For this slipper clutch design there is also a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).