Traxxas Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Functions: Brass pinion equipment

Suches as: 1 equipment and 1 set screw

Specifications: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Gear length- 1/4" Overall length- 7/16"
    Shaft diameter- 1/4" Gear diameter- 1/2"
    Mounting shaft (motor shaft) 1/8"

This thing compliments the above talked about thing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Lots of others have actually bought this thing together with the thing that you are presently reviewing.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Ideal replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal construction

CONSISTS OF:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Teeth: 28
Pitch: 48

Want an additional great thing to enhance the above mentioned thing?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for models with a slipper clutch
Black plastic construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

This thing compliments the above talked about thing.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel construction, silver in color

CONSISTS OF:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outside Diameter: .69" (17.5mm)

This thing compliments the above talked about thing.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to connect in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Safe positive locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals secure

CONSISTS OF:
Two black male plastic ports
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Below is an additional thing that compliments the thing being talked about.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Developed for models with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 76

COMMENTS:
For this slipper clutch design there is likewise a 86T equipment (TRAC4686),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).