Traxxas Nuts, 4Mm Flanged Locking Serrated- Aluminum Green

This is a plan of 4 4mm Flanged Locknuts in Green from Traxxas.

FEATURES:
Might be used in any application requiring this size locknut
Serrated rear area ensures sure grip

CONSISTS OF:
Four 4mm Flanged Locknuts

REQUIRES:
7mm Nut Motorist

SPECS:
Hex Size: 7mm
Hole Diameter: 4mm

Want one more great item to match the above pointed out item?

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
Four 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut motorist

SPECS:
Hole Diameter: 4mm
Hex Size: 6mm

This is a great enhancement to the item currently being discussed.



This is the 12mm Lock-Pin Type Hex Center from ST Racing
For the Traxxas Electric Stampede, Rustler, Outlaw, Slash
and Nitro Slash.

FEATURES:
Utilizing high quality CNC machined aluminum, these Lock-pin design alum.
wheel hex locks down on the axle pins so loosing pins are not a
problem for your Traxxas electric Stampede/Rustler/Bandit or the brand-new
Slash. Aluminum hex are also more long lasting and less likely to strip
out and supplies a much better fit to the wheel hex.

These are blue in color.

INCLUDES:
Four hex centers
One 1.5mm Allen L-wrench

SPECS:
Width: 12mm (15/32")
Thickness: 6mm (5/16")
Diameter, hole: 5.5mm (7/32")

COMMENTS:
These adapters can be set up on
Traxxas Stampede (TRAC23** & TRAD14**)
Traxxas Rustler (TRAC14**)
Traxxas Slash (TRAD19** & TRAD27**)
Traxxas Outlaw (TRAD13**)
Traxxas Nitro Slash (TRAD77**)

Lots of others have actually purchased this item together with the item that you are currently checking out.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is only one of two which are used on the E-Maxx dual motor
    set-up.

Lots of others have actually purchased this item together with the item that you are currently checking out.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)