Traxxas Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic construction

CONSISTS OF:
Two Nerf Bars for the Traxxas Slash

REQUIRES:
Installation onto Automobile

Right here is another item that compliments the item being gone over.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Changes damaged receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas Slash
Hardware

REQUIRES:
Installing receiver and bolting receiver box to chassis.

This is a fantastic enhancement to the item currently being gone over.

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon construction

CONSISTS OF:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

REQUIRES:
Installation on the chassis

The listed below item additionally pairs really well with the item being gone over.

Bumper, Front/ Bumper Mount, F

This is the Front Bumper and Mount for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic construction
Black in color

CONSISTS OF:
One Front bumper
One Front bumper mount

REQUIRES:
Installation on chassis

Frequently purchased with the item that you are currently reading about.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel construction

CONSISTS OF:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES:
Installation on the Rustler, Stampede or Bandit

COMMENTS:
For a total suspension pin set order TRAC4940

Get this item to enhance the one you are reading around.

Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic construction
Front or rear application

CONSISTS OF:
One left suspension arm
One right suspension arm

REQUIRES:
Installation on suspension assembly

SPECS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Thickness: 11.5mm (0.45")

Right here is a terrific item that several others have bought at the same time.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Bandit & Nitro Stampede.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Bandit
    and Nitro Stampede

REQUIRES:
Installation on the automobile

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Thickness: .27" (7mm)

This is a fantastic enhancement to the item currently being gone over.

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon construction
Changes a used or damaged bellcrank set
May also be set up on the Traxxas Rustler, Bandit and 2WD Slash
    models (put together in different setups depending upon design)

CONSISTS OF:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Machine Screws
Two Hollow Balls
4 Bushings
Guideline Sheet

REQUIRES:
Assembly and setup following the design manual and consisted of
direction sheet