Traxxas MXL-6s Brushless Power System Waterproof

This is the Traxxas powered by Castle
MXL-6s Water resistant Brushless Power System
with the MLX-6s ESC and the 2200kV Brushless Motor
for usage in 1/10 scale Traxxas Models.

FEATURES:
ESC;
Suitable with up to two 7-cell NiMH packs, two 2S LiPo loads, or
    two 3S LiPo packs (max 25.2V)
Vehicle detect capability disables low voltage detection if NiMH/NiCd
    batteries are used
Suitable with brushed, brushless and sensored brushless motors
Advanced circuit design permits sensorless brushless motors to operate
    with the smoothness of brushed systems
Micro-fin aluminum heatsink and cooling fan to assist dissipate heat
    for longer life
    2200kV Motor
High-temperature sintered Neodymium magnets for huge torque and
    direct power
Efficient high-speed ball bearings and precision well balanced rotor
TRX 6.5mm gold-plated bullet adapters

INCLUDES:
MLX-6s ESC, 2200kV Brushless Motor, all Connectors, 19 tooth Pinion
    Equipment, section of Double Sided-Tape

SPECS:
ESC;
Input voltage: 6S LiPo (Max 25.2 Volts), 18 NiCd/NiMH
Case Size: 2.2 x 1.9 x 1.4" (56 x 48 x 36mm)
Weight: 4.27oz (121g)
Supported Motors: Brushed/Brushless/Sensorless Brushless
On Resistance (@trans)-FWD/REV: 0.0003 ohms per phase
Motor Connectors: Traxxas 6.5mm Bullet
Battery Connectors: Traxxas High-Current
Power Wire: 10-gauge Maxx® Cable
2200kV Motor
Type: Sensorless, brushless
RPM/Volt (Kv): 2200
Weight: 14.32oz (406g)
Length: 2.97" (75.5mm)
Size: 1.64" (41.8mm)
Magnet Type: Ultra High-Temperature Sintered Neodymium
Connector Type: Traxxas 6.5mm Bullet Connectors
Wire Size: Traxxas 10-gauge Maxx® Cable