Traxxas Mounting Plate For Stampede Esc

This is the ESC and Receiver Box Mounting Plate for use on the
Traxxas Stampede.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Installing Plate
Four 3x7.5mm Flanged Button Head Screws
Two 3x12mm Flanged Button Head Screws

REQUIRES:
Setup on the car

SPECS:
Length: 87mm (3.4")
Width: 60mm (2.4")
Height: 10mm (0.39")

This product praises the above talked about product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product is frequently bought with the above stated product.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for use on the
Traxxas Stampede, Rustler, and Outlaw Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Receiver Box
One Rubber Seal
Foam Padding
Two 2.5x8mm Cap Head Screws
Two 3x10mm Cap Head Screws
Two 2.5x10mm Cap Head Screws
One Tube of Grease
Instruction sheet

REQUIRES:
Setup on the car

SPECS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

You will certainly enjoy this product if you have the product just above mentioned.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on car

Below is a fantastic product that numerous others have bought at the same time.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, reinforced nylon and is a channel-style chassis.

PACKAGE
INCLUDES: One chassis

REMARKS:
The skid plates are not included, utilize TRAC9023.

Want one more fantastic product to compliment the above stated product?

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it difficult to connect backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Instruction sheet

REQUIRES:
Soldering wires to the metal pins

The listed below product likewise pairs truly well with the product being talked about.

30T Idler Gear Steel

This is the optional Steel Idler Gear for numerous Traxxas Vehicles.

FEATURES:
Steel building

INCLUDES:
One steel 30T idler gear

REQUIRES:
Setup on car

This product praises the above talked about product.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel building
Natural color

INCLUDES:
Two front axles

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

REMARKS:
These will not work for the nitro variations. For that axle, use
    TRAC2536.

Several others have bought this product in addition to the product that you are presently reading about.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Back

INCLUDES:
Two 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

REQUIRES:
Assembly onto Automobile