Traxxas Mounting Plate For Stampede Esc

This is the ESC and Receiver Box Mounting Plate for usage on the
Traxxas Stampede.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Mounting Plate
4 3x7.5mm Flanged Button Head Screws
Two 3x12mm Flanged Button Head Screws

NEEDS:
Installation on the automobile

SPECS:
Length: 87mm (3.4")
Width: 60mm (2.4")
Height: 10mm (0.39")

This product praises the above gone over product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Externally size: 7/16" (11mm)
Width: 5/32" (4mm)

This product is frequently bought with the above pointed out product.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for usage on the
Traxxas Stampede, Rustler, and Outlaw Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Receiver Box
One Rubber Seal
Foam Padding
Two 2.5x8mm Cap Head Screws
Two 3x10mm Cap Head Screws
Two 2.5x10mm Cap Head Screws
One Tube of Grease
Direction sheet

NEEDS:
Installation on the automobile

SPECS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

You will certainly enjoy this product if you have the product above pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

Here is a excellent product that numerous others have actually purchased the very same time.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, reinforced nylon and is a channel-style chassis.

PACKAGE
CONSISTS OF: One chassis

COMMENTS:
The skid plates are not consisted of, use TRAC9023.

Want another excellent product to match the above pointed out product?

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for consistent
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
One black female plastic port
One black male plastic port
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins

The below product additionally sets really well with the product being gone over.

30T Idler Gear Steel

This is the optional Steel Idler Gear for numerous Traxxas Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One steel 30T idler gear

NEEDS:
Installation on automobile

This product praises the above gone over product.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel building
Natural color

CONSISTS OF:
Two front axles

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

COMMENTS:
These will not work for the nitro variations. For that axle, usage
    TRAC2536.

Lots of others have actually bought this product along with the product that you are currently checking out.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Automobile