Traxxas Mounting Plate For Castle Mamba Monster Esc

    This is the Mamba ESC Mounting Plate from Traxxas.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One ESC Mounting Plate
Two 3x35mm Cap Head Screws
Foam Padding

REQUIRES:
Use with Castle Creations Mamba ESC

Right here is a terrific thing that many others have purchased the very same time.

Revo Wheelie Bar Assembled (Fits All Revo Trucks)

This is the optional Assembled Wheelie Bar for all versions
of the Traxxas Revo except the 1/16 E-Revo.

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
One Assembled Wheelie Bar

REQUIRES:
Setup on the Traxxas Revo

This thing praises the main item here.

Chassis Brace, Rear For Summit E-Revo

This is the Back Chassis Brace for the 1/10 scale Traxxas E-Revo.

FUNCTIONS:
Aluminum building and construction, blue in color

CONSISTS OF:
Back Chassis Brace
Two 3x35mm Socket Head Screws
One 4x14mm Button Head Screw
Guideline Sheet

SPECIFICATIONS:
Length: 5.1" (129mm)

Regularly purchased with the thing that you are currently reading about.

Summit Led Light Bar- (Chrome, Fits Roll Cage) 4 C Lear Ligh

This is the LED Lightbar with Harness and Adapter for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Plastic building and construction
Chrome in color
JST Connectors
Clear LED Lights

CONSISTS OF:
4 LED Lights
Two Zip Ties
One Y-Harness
Directions

REQUIRES:
Setup on the automobile

The listed below thing additionally pairs actually well with the thing being gone over.

Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Elements for both nitro and electric Revo and Maxx trucks

CONSISTS OF:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

Several others have purchased this thing along with the thing that you are currently reading about.

E-Revo Gear Cover Single Motor

This is the optional Single Motor Gear Cover
for the Traxxas E-Revo

FUNCTIONS:
Plastic building and construction
Black in color

CONSISTS OF:
One Single Motor Gear Cover

REQUIRES:
Setup on the Traxxas E-Revo

COMMENTS:
For the double motor gear cover, order TRAC5677

Regularly purchased with the thing that you are currently reading about.



These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Offers a safe and secure connection for battery and motor connections on
    R/C automobiles

CONSISTS OF:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

REQUIRES:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

Right here is an additional thing that praises the thing being gone over.



This is the Mamba Beast 2 25V Electronic Speed Control
and the Neu Castle 1515 1Y 2200kV Motor, from Castle Creations.

FEATURES:
Neu Castle 2200kV Brushless Motor;
Suitable for 1/8 scale beast trucks utilizing 6S LiPO batteries
High quality large ABEC-1 front and rear ball bearings
Sintered Neodymium magnets
6.5mm gold adapters with 10 gauge wires (OK to reduce)
    Mamba Beast 2 25V ESC;
Compatible with on-road, buggies, truggies and beast trucks
    running up to 6S LiPo batteries and weighing as much as 15lbs (6.8kg)
Water resistant design permits running in nearly any environment (see
    COMMENTS below)
USB shows ability through the Castle Link USB adapter (CSEM6300)
Solder posts enable battery wire length and instructions to be easily
    altered
One year restricted service warranty through Castle Creations starting at date
    of purchase. Guarantee does not cover abuse, neglect, or damage due
    to inaccurate wiring, over voltage or overloading

CONSISTS OF:
Mamba Beast 2 25V ESC with Cooling Fan, On/Off Switch, Fan Plug,
    Motor Wires, Receiver Wire with Port and Instructions
2200KV Neu Castle Brushless Motor with 10 Gauge Leads, Connectors
    and Directions

SPECIFICATIONS:
ESC, CSEM0800
Input Voltage: 2S-6S LiPo
BEC: User selectable output in between 5 and 7 volts
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
Weight: 3.93oz (111.5g) without battery adapter
    Motor, CSEC0400
Max Input Volts: 25.2
Amp Score: 120
Weight: 15oz (424g)
Motor Diameter: 1.57" (39.98mm)
1.64" (41.78mm) with fins
Motor Length: 2.9" (75.18mm)
Shaft Diameter: 0.197" (5mm)
Ball Bearings: Oversize ABEC-1 front and rear
Port: 6.5mm gold

COMMENTS:
Not planned for use while immersed in liquid. Fan on ESC is not
    water resistant. Remove fan from ESC before exposing automobile to
    liquids.