Traxxas Motor Plate For Single Motor

This is the optional Single Motor Plate for the
Traxxas E-Maxx 16.8V RTR.

FEATURES:
Aluminum building, blue in color
Created for a tidy set up of a single brushless motor system in
the E-Maxx 16.8V RTR (needs gear cover number TRAC3997)

CONSISTS OF:
One Aluminum Motor Plate

REQUIRES:
Setup and motor cover number TRAC3997

This item praises the main item below.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

You will certainly love this thing if you have the thing above discussed.

Output Gear, 33 T W/ Spacers (

This is the Output Gear 33T for the Traxxas E-Maxx Truck.

FEATURES:
Black nylon building

CONSISTS OF:
One 33T output gear
Two spacers

REQUIRES:
Silicone Grease, use TRAC6037

SPECIFICATIONS:
External size: 1.37" (35mm)
Thickness: 1.02" (26mm)

This is a superb enhancement to the item currently being gone over.

Gearbox Halves, Shift Detent B

These are the replacement Gearbox Halves for the Traxxas E-Maxx Truck.

FEATURES:
Black plastic building

CONSISTS OF:
Gearbox halves (front and rear) and screws

REQUIRES:
Remainder of the gearbox contents

SPECIFICATIONS:
Length: 2.67 (68mm) (at largest point)
Width: 3.42" (87mm) (at largest point)

The listed below item likewise pairs truly well with the item being gone over.

Input Shaft/ Drive Gear Assemb

This is the replacement Input Shaft/Drive Gear Assembly for the
Traxxas 3905 E-Maxx Truck.

FEATURES:
Steel shaft, black in color
Steel drive gear assembly, silver in color

CONSISTS OF:
One Input Shaft with 18 Tooth Top Gear

REQUIRES:
Setup following the design handbook

SPECIFICATIONS:
Shaft Diameter: 5mm
Shaft Length: 3.53" (90mm)
Thread Size: 4mm

This is a superb enhancement to the item currently being gone over.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building

CONSISTS OF:
One slipper pressure plate
One slipper hub

REQUIRES:
Setup onto vehicle.

Below is a fantastic item that numerous others have bought at the exact same time.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

This item is regularly acquired with the above pointed out item.

Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
.8 metric pitch

CONSISTS OF:
One 62T 0.8 metric pitch spur gear

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Diameter: 2" (51mm)
Thickness: .23" (6mm)

Get this item to improve the one you are reading about.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
Changes worn or harmed lower chassis braces

CONSISTS OF:
Right and left lower chassis braces

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This item is regularly acquired with the above pointed out item.

Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, gray in color
Changes worn or broken chassis

CONSISTS OF:
One long wheelbase chassis

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)