Traxxas Motor Plate For Single Motor

This is the optional Single Motor Plate for the
Traxxas E-Maxx 16.8V RTR.

FEATURES:
Aluminum building and construction, blue in color
Designed for a tidy install of a single brushless motor system in
the E-Maxx 16.8V RTR (requires gear cover number TRAC3997)

INCLUDES:
One Aluminum Motor Plate

REQUIRES:
Installation and motor cover number TRAC3997

This product compliments the main item right here.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

You will certainly love this thing if you have the thing previously stated.

Output Gear, 33 T W/ Spacers (

This is the Output Gear 33T for the Traxxas E-Maxx Truck.

FEATURES:
Black nylon building and construction

INCLUDES:
One 33T output gear
Two spacers

REQUIRES:
Silicone Grease, use TRAC6037

SPECIFICATIONS:
Outer diameter: 1.37" (35mm)
Thickness: 1.02" (26mm)

This is a wonderful addition to the product currently being gone over.

Gearbox Halves, Shift Detent B

These are the replacement Gearbox Halves for the Traxxas E-Maxx Truck.

FEATURES:
Black plastic building and construction

INCLUDES:
Gearbox halves (front and back) and screws

REQUIRES:
Rest of the gearbox contents

SPECIFICATIONS:
Length: 2.67 (68mm) (at largest point)
Width: 3.42" (87mm) (at largest point)

The listed below product likewise sets truly well with the product being gone over.

Input Shaft/ Drive Gear Assemb

This is the replacement Input Shaft/Drive Gear Assembly for the
Traxxas 3905 E-Maxx Truck.

FEATURES:
Steel shaft, black in color
Steel drive gear assembly, silver in color

INCLUDES:
One Input Shaft with 18 Tooth Top Gear

REQUIRES:
Installation following the design handbook

SPECIFICATIONS:
Shaft Size: 5mm
Shaft Length: 3.53" (90mm)
Thread Size: 4mm

This is a wonderful addition to the product currently being gone over.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper center

REQUIRES:
Installation onto automobile.

Below is a fantastic product that lots of others have bought at the very same time.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

INCLUDES:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

This product is regularly bought with the above stated product.

Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 62T 0.8 metric pitch spur gear

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Size: 2" (51mm)
Thickness: .23" (6mm)

Get this product to improve the one you are reading around.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
Changes worn or harmed lower chassis braces

INCLUDES:
Right and left lower chassis braces

REQUIRES:
Installation on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This product is regularly bought with the above stated product.

Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, gray in color
Changes worn or damaged chassis

INCLUDES:
One long wheelbase chassis

REQUIRES:
Installation on the E-Maxx

SPECIFICATIONS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)