Traxxas Motor Plate For Single Motor

This is the optional Single Motor Plate for the
Traxxas E-Maxx 16.8V RTR.

FEATURES:
Aluminum construction, blue in color
Developed for a clean set up of a single brushless motor system in
the E-Maxx 16.8V RTR (requires gear cover number TRAC3997)

INCLUDES:
One Aluminum Motor Plate

REQUIRES:
Installation and motor cover number TRAC3997

This product compliments the main item right here.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

You will certainly love this item if you have the item previously pointed out.

Output Gear, 33 T W/ Spacers (

This is the Output Gear 33T for the Traxxas E-Maxx Truck.

FEATURES:
Black nylon construction

INCLUDES:
One 33T output gear
2 spacers

REQUIRES:
Silicone Grease, usage TRAC6037

SPECIFICATIONS:
Outer diameter: 1.37" (35mm)
Density: 1.02" (26mm)

This is a great enhancement to the product currently being discussed.

Gearbox Halves, Shift Detent B

These are the replacement Gearbox Halves for the Traxxas E-Maxx Truck.

FEATURES:
Black plastic construction

INCLUDES:
Gearbox halves (front and rear) and screws

REQUIRES:
Rest of the gearbox contents

SPECIFICATIONS:
Length: 2.67 (68mm) (at best point)
Width: 3.42" (87mm) (at best point)

The below product likewise pairs really well with the product being discussed.

Input Shaft/ Drive Gear Assemb

This is the replacement Input Shaft/Drive Gear Assembly for the
Traxxas 3905 E-Maxx Truck.

FEATURES:
Steel shaft, black in color
Steel drive gear assembly, silver in color

INCLUDES:
One Input Shaft with 18 Tooth Top Gear

REQUIRES:
Installation following the model handbook

SPECIFICATIONS:
Shaft Size: 5mm
Shaft Length: 3.53" (90mm)
Thread Size: 4mm

This is a great enhancement to the product currently being discussed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum construction

INCLUDES:
One slipper pressure plate
One slipper center

REQUIRES:
Installation onto vehicle.

Right here is a fantastic product that numerous others have bought at the same time.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Parts for both nitro and electric Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

This product is regularly acquired with the above stated product.

Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 62T 0.8 metric pitch spur gear

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Size: 2" (51mm)
Density: .23" (6mm)

Get this product to enhance the one you are reading around.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
Changes worn or harmed lower chassis braces

INCLUDES:
Right and left lower chassis braces

REQUIRES:
Installation on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Density: .43" (11mm)

This product is regularly acquired with the above stated product.

Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, gray in color
Changes worn or damaged chassis

INCLUDES:
One long wheelbase chassis

REQUIRES:
Installation on the E-Maxx

SPECIFICATIONS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)