Traxxas Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Numerous others have actually acquired this thing in addition to the thing that you are currently checking out.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Simple setup needs just snapping the fan housing on the
ESC and plugging in the connector on the ESC to the fan

INCLUDES:
One Cooling Fan System with setup sheet

REQUIRES:
Installation following the included instructions

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

Right here is a fantastic thing that many others have actually purchased the very same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Compatible with all Traxxas models that consist of the TQi telemetry
    system
May likewise be utilized with all present Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black wheel

INCLUDES:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECIFICATIONS:
Dimensions: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will certainly like this item if you have the item previously pointed out.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside diameter in between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Plugs into receiver and drops motor temperature level as much as 30°
One year restricted warranty through producer start at date of
    purchase

INCLUDES:
Fan with wire and connector, shroud and two zip ties

REQUIRES:
Connecting to motor can and connecteding into receiver

SPECIFICATIONS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will certainly like this item if you have the item previously pointed out.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide variety of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Installing Hardware

Numerous others have actually acquired this thing in addition to the thing that you are currently checking out.



This is a set of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
mounted to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and rear of the Stampede 4x4
Chevron design tread for good traction on rough surface
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) compound
Nylon building and construction six spoke wheel with molded-in beadlock ring

INCLUDES:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Diameter: 2.8" (71mm)
Overall Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm