Traxxas Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Lots of others have actually acquired this thing in addition to the thing that you are presently checking out.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic installation needs only snapping the fan real estate on the
ESC and plugging in the port on the ESC to the fan

CONSISTS OF:
One Cooling Fan Device with installation sheet

REQUIRES:
Setup following the consisted of guidelines

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Right here is a fantastic thing that many others have actually purchased the same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Compatible with all Traxxas designs that consist of the TQi telemetry
    system
May also be used with all current Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black wheel

CONSISTS OF:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECIFICATIONS:
Measurements: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will like this thing if you have the thing above mentioned.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside diameter between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Connecteds into receiver and drops motor temperature level as much as 30°
One year restricted service warranty through maker start at date of
    purchase

CONSISTS OF:
Fan with wire and port, shroud and two zip ties

REQUIRES:
Connecting to motor can and connecteding into receiver

SPECIFICATIONS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will like this thing if you have the thing above mentioned.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide array of bodies
    to be used consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Mounting Hardware

Lots of others have actually acquired this thing in addition to the thing that you are presently checking out.



This is a pair of Pro-Line Masher M2 2.8" All Terrain Front or Rear Tires
mounted to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and rear of the Stampede 4x4
Chevron style tread for excellent traction on rough surface
Side tread has a hook design that craters the dirt for excellent
    side traction
M2 (soft) substance
Nylon building six spoke wheel with molded-in beadlock ring

CONSISTS OF:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Diameter: 2.8" (71mm)
Total Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm