Traxxas Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Several others have purchased this item in addition to the item that you are presently reading about.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Easy installation requires only snapping the fan real estate on the
ESC and plugging in the port on the ESC to the fan

INCLUDES:
One Cooling Fan Device with installation sheet

REQUIRES:
Setup following the consisted of guidelines

SPECS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Here is a wonderful item that several others have purchased the very same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Compatible with all Traxxas models that consist of the TQi telemetry
    system
May likewise be utilized with all current Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black wheel

INCLUDES:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECS:
Measurements: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will certainly love this item if you have the item earlier stated.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside size between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Connecteds into receiver and drops motor temperature level as much as 30°
One year restricted service warranty through producer start at date of
    purchase

INCLUDES:
Fan with wire and port, shroud and 2 zip ties

REQUIRES:
Connecting to motor can and plugging into receiver

SPECS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will certainly love this item if you have the item earlier stated.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide array of bodies
    to be utilized consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Mounting Hardware

Several others have purchased this item in addition to the item that you are presently reading about.



This is a pair of Pro-Line Masher M2 2.8" All Terrain Front or Rear Tires
mounted to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and back of the Stampede 4x4
Chevron style tread for good traction on rough terrain
Side tread has a hook design that craters the dirt for exceptional
    side traction
M2 (soft) substance
Nylon building 6 spoke wheel with molded-in beadlock ring

INCLUDES:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECS:
Wheel Size: 2.8" (71mm)
General Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm