Traxxas Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Several others have actually gotten this thing together with the thing that you are presently reviewing.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic installation requires just snapping the fan real estate on the
ESC and plugging in the connector on the ESC to the fan

INCLUDES:
One Cooling Fan Device with installation sheet

NEEDS:
Setup following the consisted of directions

SPECS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Below is a fantastic thing that many others have actually bought at the very same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Compatible with all Traxxas models that consist of the TQi telemetry
    system
May also be utilized with all current Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black wheel

INCLUDES:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECS:
Dimensions: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will enjoy this product if you have the product earlier discussed.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outdoors size in between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Connecteds into receiver and drops motor temperature level as much as 30°
One year restricted guarantee through maker start at date of
    purchase

INCLUDES:
Fan with wire and connector, shroud and two zip ties

NEEDS:
Attaching to motor can and connecteding into receiver

SPECS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will enjoy this product if you have the product earlier discussed.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts allow a wide array of bodies
    to be utilized consisting of rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Installing Hardware

Several others have actually gotten this thing together with the thing that you are presently reviewing.



This is a set of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and back of the Stampede 4x4
Chevron design tread for great traction on rough terrain
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) substance
Nylon building and construction six spoke wheel with molded-in beadlock ring

INCLUDES:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECS:
Wheel Size: 2.8" (71mm)
General Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm