Traxxas Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building and construction

SUCHES AS:
(12) Washers

SPECS:
Size: 3x6mm

The below thing additionally pairs really well with the thing being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

Below is one more thing that compliments the thing being gone over.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel building and construction

SUCHES AS:
6 steel shoulder screws

SPECS:
Length: 12mm
Size: 3mm

This thing compliments the main item here.

Steerng Bellcrnk Screws (R)

These are Replacement Steering Hardware from Traxxas.

FEATURES:
Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black guiding bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES:
(2) Bellcrank Screws
(2) Draglink Screws

SPECS:
Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

Lots of others have purchased this thing in addition to the thing that you are currently checking out.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x15mm button head screw is needed

SUCHES AS:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

This thing compliments the above gone over thing.

3 X 20Mm Button Hex Screw (6)

This is a plan of 6 3x20mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x20mm button head screw is needed

SUCHES AS:
6 3x20mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 20mm
Size: 3mm

Below is a wonderful thing that many others have purchased the same time.

3Mm Nyl Lock Nuts/12

These are 3mm Nylon Locking Nuts from Traxxas.

FEATURES:
Durable metal building and construction
Nylon inserts

SUCHES AS:
(12) Lock Nuts

SPECS:
Size: 3mm

Get this thing to boost the one you are reading about.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Building and construction
Silver in Color
Bent for Easy Elimination

SUCHES AS:
Ten Bent Silver Metal Body Clips

NEEDS:
Assembly onto Car

Get this thing to boost the one you are reading about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

SUCHES AS:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

REMARKS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

Want one more wonderful thing to enhance the above pointed out thing?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

SUCHES AS:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")

Lots of others have purchased this thing in addition to the thing that you are currently checking out.

Stub Axle Pins (4)

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3,
Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle
and hold the wheel to the axle.

INCLUDES:
4- stub axle pins

WAJ
1/30/94