Traxxas Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building

INCLUDES:
(12) Washers

SPECIFICATIONS:
Size: 3x6mm

The below item also sets truly well with the item being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

Here is one more item that compliments the item being gone over.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel building

INCLUDES:
6 steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Diameter: 3mm

This item compliments the main item below.

Steerng Bellcrnk Screws (R)

These are Replacement Steering Hardware from Traxxas.

FEATURES:
Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black guiding bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES:
(2) Bellcrank Screws
(2) Draglink Screws

SPECIFICATIONS:
Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

Lots of others have actually bought this item in addition to the item that you are presently reading about.

3 X 15Mm Button Hex Screw (6)

This is a package of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm button head screw is needed

INCLUDES:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

This item compliments the above gone over item.

3 X 20Mm Button Hex Screw (6)

This is a package of six 3x20mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can also be used in any
    application where a 3x20mm button head screw is needed

INCLUDES:
6 3x20mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 20mm
Diameter: 3mm

Here is a excellent item that numerous others have actually purchased the very same time.

3Mm Nyl Lock Nuts/12

These are 3mm Nylon Locking Nuts from Traxxas.

FEATURES:
Resilient metal building
Nylon inserts

INCLUDES:
(12) Lock Nuts

SPECIFICATIONS:
Size: 3mm

Get this item to enhance the one you are reading about.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Building and construction
Silver in Color
Bent for Easy Elimination

INCLUDES:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Vehicle

Get this item to enhance the one you are reading about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL variation of the Rustler
or Stampede.

Want one more excellent item to compliment the above discussed item?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

REQUIRES:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

Lots of others have actually bought this item in addition to the item that you are presently reading about.

Stub Axle Pins (4)

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3,
Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle
and hold the wheel to the axle.

INCLUDES:
4- stub axle pins

WAJ
1/30/94