Traxxas E-Maxx Brushless Monster Truck RTR, w/ TQi 2.4GHz & TSM - No Bat

This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled
All set to Run Traxxas E-Maxx Monster Truck.
with Traxxas Stability Management.
**Needs Batteries and Battery charger**

Powered by the factory set up Castle Creations MXL-6s Waterproof
Brushless Power System.
Includes Wireless Module and Telemetry Sensors.

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic parts to manage wheel spin and steering
    direction on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: 0.08 (2mm) thick composite with fast release hold
    downs and scaleable battery parts to fit a variety of stick
    or side-by-side packs
Drive: Four wheel shaft drive with Revo spec sealed large diameter
    external and center drive shafts
Motor: Castle Creations MXL-6s 2200Kv brushless, SIX capable, high-
    strength neodymium magnets, 5mm shaft, aluminum motor can
Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    Module that permits cordless connection to the Traxxas Link
    Application with the consisted of Traxxas Link Module
    for instantaneous Bluetooth connection to an instinctive
    high definition visual user interface featuring Real-Time
    Telemetry, Customizable Dashboards, Steering/Throttle Exposition,
    Steering/Braking Double Rate, Servo Reversing, Endpoint Change,
    Profile Customization and Sharing
    5 channel receiver with 3 telemetry ports, factory set up
    telemetry sensing units, and failsafe is consisted of and
    allows design to be tuned from an iPhone FOUR, 5, 5C FIVE or iPod
    Touch 5th generation or later on, iPad 3rd generation or later on, or
    iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
    6.5mm gold-plated connectors, high performance heatsink
Battery Battery charger: 4A DC powered peak identifying
Ball Bearings: Full set, rubber sealed
Shocks: Eight oil-filled, composite bodied with white springs, rubber
    pressure bladders and double O-ring seals
Transmission: Sealed
Differentials: Revo spec with X-ring seals to keep oil in and dirt
    out, bevel gear style, sealed restricted slip
Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum
    slipper clutch friction pads
Transmission: Heavy duty brushless prepared, two-speed reversing
    transmission with steel idler gear
Tires: Treaded soft compound Maxx 6.3" (160mm) external diameter 3.3"
    (85mm) wide
Wheels: 3.8" (96mm) diameter black chrome 10 spoke (spokes remain in
    groups of 2) 2.7" (70mm) width, 17mm hex
**To use wheels with 14mm hexes, order 2 14mm Hex Hubs TRAC4954**
**and one Nylon Locknut Set, TRAC4149**
Bumpers: Plastic front and back with kickups
Suspension: Adjustable Revo Spec sealed pivot balls
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the car in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Steering: Heavy duty dual servo bell-crank type with ball bearings

CONSISTS OF:
Traxxas E-Maxx RTR Monster Truck, waterproof MXL-6s Brushless Power
    System, wide track body, 2-channel 2.4GHz TQi radio with 2
    servos, TSM, cordless module, high power 2200Kv motor,
    telemetry sensing units for speed/RPM, motor temperature level and battery
    voltage

NEEDS:
Radio Batteries: Eight for transmitter
Batteries: 2 NiMH 7-cell flat packs with Traxxas connectors
Battery Battery charger: Compatible with selected batteries
Misc. Products: Structure and track devices

SPECIFICATIONS:
LORRY-
Length: 22.5 (571mm)
Width: 16.5 (419mm)
Height: 9.5 (241mm)
Weight: 9.6 lbs (4366g) approx. without batteries
Wheelbase: 13.2" (335mm)
Front Tread: 12.9" (329mm)
Rear Tread: 13.0" (331mm) side-to-side at wheel centers
Front Track: 16.4" (417mm)
Rear Track: 16.5" (419mm) side to side at external edges of wheels
Ground Clearance: 2.6" (65mm)
    BODY-
Length: 19.5" (496mm)
Width: 7.7" (195mm) at rear wheels, best point
6.5" (165mm) behind front wheels, best point
Height: 5.3" (136mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 6x12mm Fr Axle Provider 1 DTXC1569
2 12x18mm Fr Axle Provider 1 DTXC1597
2 6x12mm R Axle Provider 1 DTXC1569
2 12x18mm R Axle Provider 1 DTXC1597
2 5x11mm Steering Bellcranks 1 DTXC1547
3 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Idler gear 1 DTXC1547
2 6x12mm Output Shaft 1 DTXC1569
1 10x15mm R Diff 1 DTXC1595
1 8x16mm R Diff 1 DTXC1585
2 6x12mm R Diff 1 DTXC1569

Readily available in the following body colors;
    Blue, TRAD63BB Black, TRAD63LL
    Red, TRAD63RR Silver, TRAD63SS