Traxxas E-Maxx Brushless Monster Truck RTR, w/ TQi 2.4GHz & TSM - No Bat

This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled
Prepared to Run Traxxas E-Maxx Monster Truck.
with Traxxas Stability Management.
**Needs Batteries and Charger**

Powered by the factory installed Castle Creations MXL-6s Waterproof
Brushless Power System.
Includes Wireless Module and Telemetry Sensors.

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to manage wheel spin and steering
    direction on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: 0.08 (2mm) thick composite with fast release hold
    downs and scaleable battery components to fit a variety of stick
    or side-by-side loads
Drive: Four wheel shaft drive with Revo spec sealed large size
    external and center drive shafts
Motor: Castle Creations MXL-6s 2200Kv brushless, 6S capable, high-
    strength neodymium magnets, 5mm shaft, aluminum motor can
Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    Module that permits wireless connection to the Traxxas Link
    Application with the consisted of Traxxas Link Module
    for immediate Bluetooth connectivity to an intuitive
    hd graphical user interface featuring Real-Time
    Telemetry, Customizable Dashboards, Steering/Throttle Expo,
    Steering/Braking Double Rate, Servo Reversing, Endpoint Modification,
    Profile Personalization and Sharing
    5 channel receiver with 3 telemetry ports, factory installed
    telemetry sensing units, and failsafe is consisted of and
    makes it possible for design to be tuned from an iPhone FOUR, 5, 5C FIVE or iPod
    Touch 5th generation or later, iPad 3rd generation or later, or
    iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
    6.5mm gold-plated ports, high effectiveness heatsink
Battery Charger: 4A DC powered peak spotting
Ball Bearings: Full set, rubber sealed
Shocks: 8 oil-filled, composite bodied with white springs, rubber
    pressure bladders and double O-ring seals
Transmission: Sealed
Differentials: Revo spec with X-ring seals to keep oil in and dirt
    out, bevel gear design, sealed restricted slip
Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum
    slipper clutch friction pads
Transmission: Sturdy brushless ready, two-speed reversing
    transmission with steel idler gear
Tires: Treaded soft substance Maxx 6.3" (160mm) external size 3.3"
    (85mm) broad
Wheels: 3.8" (96mm) size black chrome 10 spoke (spokes are in
    groups of two) 2.7" (70mm) width, 17mm hex
**To use wheels with 14mm hexes, order two 14mm Hex Hubs TRAC4954**
**and one Nylon Locknut Set, TRAC4149**
Bumpers: Plastic front and rear with kickups
Suspension: Adjustable Revo Specification sealed pivot balls
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the car in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind vehicle
Steering: Sturdy dual servo bell-crank type with ball bearings

INCLUDES:
Traxxas E-Maxx RTR Monster Truck, waterproof MXL-6s Brushless Power
    System, broad track body, 2-channel 2.4GHz TQi radio with two
    servos, TSM, wireless module, high power 2200Kv motor,
    telemetry sensing units for speed/RPM, motor temperature and battery
    voltage

NEEDS:
Radio Batteries: 8 for transmitter
Batteries: 2 NiMH 7-cell flat packs with Traxxas ports
Battery Charger: Suitable with picked batteries
Misc. Products: Building and track equipment

SPECIFICATIONS:
LORRY-
Length: 22.5 (571mm)
Width: 16.5 (419mm)
Height: 9.5 (241mm)
Weight: 9.6 pounds (4366g) approx. without batteries
Wheelbase: 13.2" (335mm)
Front Tread: 12.9" (329mm)
Back Tread: 13.0" (331mm) side-to-side at wheel centers
Front Track: 16.4" (417mm)
Rear Track: 16.5" (419mm) side to side at external edges of wheels
Ground Clearance: 2.6" (65mm)
    BODY-
Length: 19.5" (496mm)
Width: 7.7" (195mm) at rear wheels, widest point
6.5" (165mm) behind front wheels, widest point
Height: 5.3" (136mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 6x12mm Fr Axle Carrier 1 DTXC1569
2 12x18mm Fr Axle Carrier 1 DTXC1597
2 6x12mm R Axle Carrier 1 DTXC1569
2 12x18mm R Axle Carrier 1 DTXC1597
2 5x11mm Steering Bellcranks 1 DTXC1547
3 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Idler gear 1 DTXC1547
2 6x12mm Output Shaft 1 DTXC1569
1 10x15mm R Diff 1 DTXC1595
1 8x16mm R Diff 1 DTXC1585
2 6x12mm R Diff 1 DTXC1569

Offered in the following body colors;
    Blue, TRAD63BB Black, TRAD63LL
    Red, TRAD63RR Silver, TRAD63SS