Traxxas E-Maxx Brushless Monster Truck RTR, w/ TQi 2.4GHz & TSM - No Bat

This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled
Prepared to Run Traxxas E-Maxx Beast Truck.
with Traxxas Stability Management.
**Requires Batteries and Charger**

Powered by the factory set up Castle Creations MXL-6s Waterproof
Brushless Power System.
Includes Wireless Module and Telemetry Sensors.

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic components to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    tweaked or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: 0.08 (2mm) thick composite with fast release hold
    downs and scaleable battery components to fit a range of stick
    or side-by-side packs
Own: Four wheel shaft drive with Revo spec sealed large diameter
    outer and center drive shafts
Motor: Castle Creations MXL-6s 2200Kv brushless, SIX capable, high-
    strength neodymium magnets, 5mm shaft, aluminum motor can
Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    Module that enables wireless connection to the Traxxas Link
    Application with the consisted of Traxxas Link Module
    for instant Bluetooth connectivity to an intuitive
    hd visual user interface including Real-Time
    Telemetry, Customizable Dashboards, Steering/Throttle Exposition,
    Steering/Braking Double Rate, Servo Reversing, Endpoint Change,
    Profile Modification and Sharing
    5 channel receiver with 3 telemetry ports, factory set up
    telemetry sensors, and failsafe is consisted of and
    allows model to be tuned from an iPhone 4S, 5, 5C FIVE or iPod
    Touch 5th generation or later on, iPad 3rd generation or later on, or
    iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
    6.5mm gold-plated ports, high performance heatsink
Battery Charger: 4A DC powered peak spotting
Ball Bearings: Full set, rubber sealed
Shocks: Eight oil-filled, composite bodied with white springs, rubber
    pressure bladders and double O-ring seals
Transmission: Sealed
Differentials: Revo spec with X-ring seals to keep oil in and dirt
    out, bevel equipment style, sealed limited slip
Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum
    slipper clutch friction pads
Transmission: Heavy duty brushless all set, two-speed reversing
    transmission with steel idler equipment
Tires: Treaded soft compound Maxx 6.3" (160mm) outer diameter 3.3"
    (85mm) wide
Wheels: 3.8" (96mm) diameter black chrome 10 spoke (spokes remain in
    groups of two) 2.7" (70mm) width, 17mm hex
**To use wheels with 14mm hexes, order two 14mm Hex Hubs TRAC4954**
**and one Nylon Locknut Set, TRAC4149**
Bumpers: Plastic front and rear with kickups
Suspension: Adjustable Revo Specification sealed pivot balls
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind car
Steering: Heavy duty dual servo bell-crank type with ball bearings

CONSISTS OF:
Traxxas E-Maxx RTR Beast Truck, water resistant MXL-6s Brushless Power
    System, wide track body, 2-channel 2.4GHz TQi radio with two
    servos, TSM, wireless module, high power 2200Kv motor,
    telemetry sensors for speed/RPM, motor temperature level and battery
    voltage

NEEDS:
Radio Batteries: Eight for transmitter
Batteries: 2 NiMH 7-cell flat packs with Traxxas ports
Battery Charger: Suitable with selected batteries
Misc. Products: Structure and track devices

SPECS:
LORRY-
Length: 22.5 (571mm)
Width: 16.5 (419mm)
Height: 9.5 (241mm)
Weight: 9.6 pounds (4366g) approx. without batteries
Wheelbase: 13.2" (335mm)
Front Tread: 12.9" (329mm)
Back Tread: 13.0" (331mm) side-to-side at wheel centers
Front Track: 16.4" (417mm)
Rear Track: 16.5" (419mm) side to side at outer edges of wheels
Ground Clearance: 2.6" (65mm)
    BODY-
Length: 19.5" (496mm)
Width: 7.7" (195mm) at rear wheels, best point
6.5" (165mm) behind front wheels, best point
Height: 5.3" (136mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 6x12mm Fr Axle Provider 1 DTXC1569
2 12x18mm Fr Axle Provider 1 DTXC1597
2 6x12mm R Axle Provider 1 DTXC1569
2 12x18mm R Axle Provider 1 DTXC1597
2 5x11mm Steering Bellcranks 1 DTXC1547
3 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Idler equipment 1 DTXC1547
2 6x12mm Output Shaft 1 DTXC1569
1 10x15mm R Diff 1 DTXC1595
1 8x16mm R Diff 1 DTXC1585
2 6x12mm R Diff 1 DTXC1569

Offered in the following body colors;
    Blue, TRAD63BB Black, TRAD63LL
    Red, TRAD63RR Silver, TRAD63SS