Traxxas E-Maxx Brushless Monster Truck RTR, w/ TQi 2.4GHz & TSM - No Bat

This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled
Ready to Run Traxxas E-Maxx Monster Truck.
with Traxxas Stability Management.
**Requires Batteries and Battery charger**

Powered by the factory installed Castle Creations MXL-6s Waterproof
Brushless Power System.
Includes Wireless Module and Telemetry Sensors.

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic parts to control wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or turned off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: 0.08 (2mm) thick composite with fast release hold
    downs and scaleable battery parts to fit a variety of stick
    or side-by-side packs
Own: 4 wheel shaft drive with Revo spec sealed large diameter
    outer and center drive shafts
Motor: Castle Creations MXL-6s 2200Kv brushless, SIX capable, high-
    strength neodymium magnets, 5mm shaft, aluminum motor can
Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    Module that permits wireless connection to the Traxxas Link
    Application with the included Traxxas Link Module
    for immediate Bluetooth connection to an intuitive
    hd graphical user interface including Real-Time
    Telemetry, Customizable Dashboards, Steering/Throttle Exposition,
    Steering/Braking Dual Rate, Servo Reversing, Endpoint Change,
    Profile Customization and Sharing
    5 channel receiver with 3 telemetry ports, factory installed
    telemetry sensing units, and failsafe is included and
    enables model to be tuned from an iPhone FOUR, 5, 5C 5S or iPod
    Touch 5th generation or later on, iPad 3rd generation or later on, or
    iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
    6.5mm gold-plated connectors, high effectiveness heatsink
Battery Battery charger: 4A DC powered peak discovering
Ball Bearings: Full set, rubber sealed
Shocks: Eight oil-filled, composite bodied with white springs, rubber
    pressure bladders and double O-ring seals
Transmission: Sealed
Differentials: Revo spec with X-ring seals to keep oil in and dirt
    out, bevel equipment style, sealed minimal slip
Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum
    slipper clutch friction pads
Transmission: Sturdy brushless all set, two-speed reversing
    transmission with steel idler equipment
Tires: Treaded soft compound Maxx 6.3" (160mm) outer diameter 3.3"
    (85mm) wide
Wheels: 3.8" (96mm) diameter black chrome 10 spoke (spokes are in
    groups of two) 2.7" (70mm) width, 17mm hex
**To utilize wheels with 14mm hexes, order two 14mm Hex Hubs TRAC4954**
**and one Nylon Locknut Set, TRAC4149**
Bumpers: Plastic front and rear with kickups
Suspension: Adjustable Revo Spec sealed pivot balls
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
Steering: Sturdy dual servo bell-crank type with ball bearings

CONSISTS OF:
Traxxas E-Maxx RTR Monster Truck, water resistant MXL-6s Brushless Power
    System, wide track body, 2-channel 2.4GHz TQi radio with two
    servos, TSM, wireless module, high power 2200Kv motor,
    telemetry sensing units for speed/RPM, motor temperature and battery
    voltage

REQUIRES:
Radio Batteries: Eight for transmitter
Batteries: Two NiMH 7-cell flat packs with Traxxas connectors
Battery Battery charger: Suitable with chosen batteries
Misc. Products: Structure and track equipment

SPECIFICATIONS:
LORRY-
Length: 22.5 (571mm)
Width: 16.5 (419mm)
Height: 9.5 (241mm)
Weight: 9.6 pounds (4366g) approx. without batteries
Wheelbase: 13.2" (335mm)
Front Tread: 12.9" (329mm)
Back Tread: 13.0" (331mm) side-to-side at wheel centers
Front Track: 16.4" (417mm)
Rear Track: 16.5" (419mm) side to side at outer edges of wheels
Ground Clearance: 2.6" (65mm)
    BODY-
Length: 19.5" (496mm)
Width: 7.7" (195mm) at rear wheels, widest point
6.5" (165mm) behind front wheels, widest point
Height: 5.3" (136mm)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 6x12mm Fr Axle Provider 1 DTXC1569
2 12x18mm Fr Axle Provider 1 DTXC1597
2 6x12mm R Axle Provider 1 DTXC1569
2 12x18mm R Axle Provider 1 DTXC1597
2 5x11mm Steering Bellcranks 1 DTXC1547
3 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Idler equipment 1 DTXC1547
2 6x12mm Output Shaft 1 DTXC1569
1 10x15mm R Diff 1 DTXC1595
1 8x16mm R Diff 1 DTXC1585
2 6x12mm R Diff 1 DTXC1569

Available in the following body colors;
    Blue, TRAD63BB Black, TRAD63LL
    Red, TRAD63RR Silver, TRAD63SS