Traxxas E-Maxx Brushless Monster Truck RTR, w/ TQi 2.4GHz & TSM - No Bat

This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled
All set to Run Traxxas E-Maxx Monster Truck.
with Traxxas Stability Management.
**Needs Batteries and Battery charger**

Powered by the factory set up Castle Creations MXL-6s Waterproof
Brushless Power System.
Includes Wireless Module and Telemetry Sensors.

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: 0.08 (2mm) thick composite with fast release hold
    downs and scaleable battery components to fit a range of stick
    or side-by-side packs
Own: 4 wheel shaft drive with Revo specification sealed large diameter
    external and center drive shafts
Motor: Castle Creations MXL-6s 2200Kv brushless, 6S capable, high-
    strength neodymium magnets, 5mm shaft, aluminum motor can
Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    Module that permits wireless connection to the Traxxas Link
    Application with the included Traxxas Link Module
    for instantaneous Bluetooth connection to an intuitive
    hd visual user interface including Real-Time
    Telemetry, Customizable Dashboards, Steering/Throttle Exposition,
    Steering/Braking Dual Rate, Servo Reversing, Endpoint Adjustment,
    Profile Customization and Sharing
    5 channel receiver with 3 telemetry ports, factory set up
    telemetry sensors, and failsafe is included and
    allows design to be tuned from an iPhone FOUR, 5, 5C 5S or iPod
    Touch 5th generation or later, iPad 3rd generation or later, or
    iPad Mini
Electronic Speed Control: Castle Creations MXL-6s, cooling fan,
    6.5mm gold-plated adapters, high efficiency heatsink
Battery Battery charger: 4A DC powered peak detecting
Ball Bearings: Full set, rubber sealed
Shocks: 8 oil-filled, composite bodied with white springs, rubber
    pressure bladders and double O-ring seals
Transmission: Sealed
Differentials: Revo specification with X-ring seals to keep oil in and dirt
    out, bevel gear style, sealed restricted slip
Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum
    slipper clutch friction pads
Transmission: Sturdy brushless ready, two-speed reversing
    transmission with steel idler gear
Tires: Treaded soft compound Maxx 6.3" (160mm) external diameter 3.3"
    (85mm) broad
Wheels: 3.8" (96mm) diameter black chrome 10 spoke (spokes are in
    groups of two) 2.7" (70mm) width, 17mm hex
**To utilize wheels with 14mm hexes, order two 14mm Hex Hubs TRAC4954**
**and one Nylon Locknut Set, TRAC4149**
Bumpers: Plastic front and rear with kickups
Suspension: Adjustable Revo Specification sealed pivot balls
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind car
Steering: Sturdy double servo bell-crank type with ball bearings

CONSISTS OF:
Traxxas E-Maxx RTR Monster Truck, water resistant MXL-6s Brushless Power
    System, broad track body, 2-channel 2.4GHz TQi radio with two
    servos, TSM, wireless module, high power 2200Kv motor,
    telemetry sensors for speed/RPM, motor temperature and battery
    voltage

REQUIRES:
Radio Batteries: 8 for transmitter
Batteries: 2 NiMH 7-cell flat packs with Traxxas adapters
Battery Battery charger: Suitable with chosen batteries
Misc. Products: Structure and track equipment

SPECIFICATIONS:
LORRY-
Length: 22.5 (571mm)
Width: 16.5 (419mm)
Height: 9.5 (241mm)
Weight: 9.6 lbs (4366g) approx. without batteries
Wheelbase: 13.2" (335mm)
Front Tread: 12.9" (329mm)
Rear Tread: 13.0" (331mm) side-to-side at wheel centers
Front Track: 16.4" (417mm)
Rear Track: 16.5" (419mm) side to side at external edges of wheels
Ground Clearance: 2.6" (65mm)
    BODY-
Length: 19.5" (496mm)
Width: 7.7" (195mm) at rear wheels, best point
6.5" (165mm) behind front wheels, best point
Height: 5.3" (136mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 6x12mm Fr Axle Carrier 1 DTXC1569
2 12x18mm Fr Axle Carrier 1 DTXC1597
2 6x12mm R Axle Carrier 1 DTXC1569
2 12x18mm R Axle Carrier 1 DTXC1597
2 5x11mm Steering Bellcranks 1 DTXC1547
3 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Idler gear 1 DTXC1547
2 6x12mm Output Shaft 1 DTXC1569
1 10x15mm R Diff 1 DTXC1595
1 8x16mm R Diff 1 DTXC1585
2 6x12mm R Diff 1 DTXC1569

Readily available in the following body colors;
    Blue, TRAD63BB Black, TRAD63LL
    Red, TRAD63RR Silver, TRAD63SS